Hi all, I have the same problem, over patch port I can't insert a QoS or a queue
It exist a solution? Regards, On Wednesday, April 29, 2015 at 12:03:07 PM UTC-5, Navneet Singh wrote: > > Hi All > > I need to configure OVS queues using OVS patch ports. Below is my setup. > > > > --------------------------------------------------------------------------------------------------------------------------- > | > | ____________ ___*192.168.1.1*__ > | | br0 | patch-port | br1 > | > | | eth1|-----------------| eth2 > | > | |_eth0________| |_________eth3_| > / > \ > / > \ > / > \ > / > \ > Laptop-1 > Laptop-2 > IP-192.168.1.100 > IP-192.168.1.11 > > > I'm able to ping Laptop-1 and Laptop-2 but not able to achieve rate limit > when I'm applying QOS policy at port eth1 of br0. > I'm using below command.. > > ovs-vsctl set port eth1 qos=@newqos -- --id=@newqos create qos >> type=linux-htb queues=0=@q0,1=@q1 -- --id=@q0 create queue >> other-config:min-rate=1000000 other-config:max-rate=1000000 -- --id=@q1 >> create queue other-config:min-rate=3000000 other-config:max-rate=300000 >> 0 > > > Thanks in advance > > -- > Navneet > > >
_______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
