On 22 November 2015 at 12:23, <[email protected]> wrote: > Hi all, > > I have the same problem, over patch port I can't insert a QoS or a queue > > It exist a solution? > No. There is no solution. As of now, you should not use patch ports for QoS. The reason being patch ports do not exist inside linux kernel.
> > Regards, > > On Wednesday, April 29, 2015 at 12:03:07 PM UTC-5, Navneet Singh wrote: >> >> Hi All >> >> I need to configure OVS queues using OVS patch ports. Below is my setup. >> >> >> >> --------------------------------------------------------------------------------------------------------------------------- >> | >> | ____________ ___*192.168.1.1*__ >> | | br0 | patch-port | br1 >> | >> | | eth1|-----------------| eth2 >> | >> | |_eth0________| |_________eth3_| >> / >> \ >> / >> \ >> / >> \ >> / >> \ >> Laptop-1 >> Laptop-2 >> IP-192.168.1.100 >> IP-192.168.1.11 >> >> >> I'm able to ping Laptop-1 and Laptop-2 but not able to achieve rate limit >> when I'm applying QOS policy at port eth1 of br0. >> I'm using below command.. >> >> ovs-vsctl set port eth1 qos=@newqos -- --id=@newqos create qos >>> type=linux-htb queues=0=@q0,1=@q1 -- --id=@q0 create queue >>> other-config:min-rate=1000000 other-config:max-rate=1000000 -- --id=@q1 >>> create queue other-config:min-rate=3000000 other-config:max-rate=300000 >>> 0 >> >> >> Thanks in advance >> >> -- >> Navneet >> >> >> > > _______________________________________________ > discuss mailing list > [email protected] > http://openvswitch.org/mailman/listinfo/discuss > >
_______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
