Hello all,
I was hoping someone might be able to help me diagnose what might be
going on.
Right now I have a bond0 interface setup with jumbo packets. I can get
18gigabit/s throughput to a single host. However inside the vms I am limited by
10gigabits per second. The VM’s have working jumbo packets.
my internal bridge:
Bridge br-int
fail_mode: secure
Port patch-tun
Interface patch-tun
type: patch
options: {peer=patch-int}
Port "qvoff62107e-96"
tag: 3
Interface "qvoff62107e-96"
Port int-br-data
Interface int-br-data
Port br-int
Interface br-int
type: internal
my interface reported settings:
Settings for qvoff62107e-96:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Speed: 10000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
MDI-X: Unknown
Cannot get wake-on-lan settings: Operation not permitted
Link detected: yes
I searched some of the previous mailing lists and I saw some people asking
about setting it via ethtool( that does not work )
ubuntu@anguished-grade:~$ sudo ethtool -s qvoff62107e-96 speed 10000
Cannot set new settings: Operation not supported
not setting speed
Any insights or open would be appreciated.
Thanks!
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
