What can you get over loopback in the VM?. It's likely your hitting a
CPU/bus bound limit.
On 7/05/2016 06:47, "ed bond" <[email protected]> wrote:
> Hello all,
>
> I was hoping someone might be able to help me diagnose what might be going
> on.
>
> Right now I have a bond0 interface setup with jumbo packets. I can get
> 18gigabit/s throughput to a single host. However inside the vms I am
> limited by 10gigabits per second. The VM’s have working jumbo packets.
>
> my internal bridge:
> Bridge br-int
> fail_mode: secure
> Port patch-tun
> Interface patch-tun
> type: patch
> options: {peer=patch-int}
> Port "qvoff62107e-96"
> tag: 3
> Interface "qvoff62107e-96"
> Port int-br-data
> Interface int-br-data
> Port br-int
> Interface br-int
> type: internal
>
> my interface reported settings:
> Settings for qvoff62107e-96:
> Supported ports: [ ]
> Supported link modes: Not reported
> Supported pause frame use: No
> Supports auto-negotiation: No
> Advertised link modes: Not reported
> Advertised pause frame use: No
> Advertised auto-negotiation: No
> Speed: 10000Mb/s
> Duplex: Full
> Port: Twisted Pair
> PHYAD: 0
> Transceiver: internal
> Auto-negotiation: off
> MDI-X: Unknown
> Cannot get wake-on-lan settings: Operation not permitted
> Link detected: yes
>
>
> I searched some of the previous mailing lists and I saw some people asking
> about setting it via ethtool( that does not work )
> ubuntu@anguished-grade:~$ sudo ethtool -s qvoff62107e-96 speed 10000
> Cannot set new settings: Operation not supported
> not setting speed
>
>
>
> Any insights or open would be appreciated.
>
> Thanks!
>
>
>
>
> _______________________________________________
> discuss mailing list
> [email protected]
> http://openvswitch.org/mailman/listinfo/discuss
>
>
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
