On Sun, Jul 24, 2016 at 10:29:43AM +0000, fatt 3issam wrote: > I'm trying to test poor connexion networks. So in a simple linear topology > (host1 ---- switch1 ------ (s2-eth2)switch2(s2-eth1) ----- host2) I created > packet loss (50%) in the interface s2-eth2 using the tc command, I pinged > from host1 to host2 and indeed the ping results are around the 50% loss. Now > the problem is when I try to prove these results with ifconfig I'm seeing > that the rx/tx drop counts are always 0 (the same goes for the > errors/overruns/collisions counters with their specific tests of course)!!! > P.S: I also tried to jam the network by creating some background trafic with > iperf tool but still seeing 0s! > How can I affect ifconfig counters or how to actually make veth interfaces > feel what's going on! because I need to have those numbers registred on the > port's stats to get them from OpenFlow after!! > I hope that this issue is clear and thanks in advance.Best regards. >
This doesn't seem to have anything to do with OVS. I believe that when TC drops a packet, the drops will be accounted by the packet scheduler rather than by the interface, so you should be able to use some "tc -s" command to view drops. _______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss