The results of a weekend of case-tweaking: http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-interim/empty-20150713.png
Main changes: - the screws are M2 with a nominal thread length of 7 mm, - the screws move perpendicular to the bottom face (i.e., "vertically"), - the lanyard hole is vertical, too, and less twisty, - the USB connector (highlighted in green) is much closer to the battery. Known issues: - still no cut-outs for USB and the switch, - the lanyard hole does not end well at the bottom - I should make the whole corner part of the top shell The STLs: http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-interim/top-20150713.stl http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-interim/bottom-20150713.stl The source: https://gitlab.com/anelok/anelok/blob/master/me3/case.py - Werner _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
