Your (clever) case design + electronic design may be useful for more than just the anelok password safe. On Jul 13, 2015 12:30 AM, "Werner Almesberger" <[email protected]> wrote:
> The results of a weekend of case-tweaking: > > > http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-interim/empty-20150713.png > > Main changes: > - the screws are M2 with a nominal thread length of 7 mm, > - the screws move perpendicular to the bottom face (i.e., "vertically"), > - the lanyard hole is vertical, too, and less twisty, > - the USB connector (highlighted in green) is much closer to the > battery. > > Known issues: > - still no cut-outs for USB and the switch, > - the lanyard hole does not end well at the bottom - I should > make the whole corner part of the top shell > > The STLs: > > http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-interim/top-20150713.stl > > http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-interim/bottom-20150713.stl > > The source: > https://gitlab.com/anelok/anelok/blob/master/me3/case.py > > - Werner > > _______________________________________________ > Qi Hardware Discussion List > Mail to list (members only): [email protected] > Subscribe or Unsubscribe: > http://lists.en.qi-hardware.com/mailman/listinfo/discussion >
_______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
