A new version of the case: I cleaned up some details, e.g., the lanyard hole now has a proper exit and there are cut-outs for USB and the switch.
The switch also has a knob, so one doesn't operate the little knob on the component directly, but moves the customized knob which then operates the actual switch. The knob is shown in purple here: http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-interim/case-20150714.png The knob is extremely simple. Probably need to get a bit more complex, but it may actually work even in its present form. http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-interim/top-20150714.stl http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-interim/bottom-20150714.stl http://downloads.qi-hardware.com/people/werner/anelok/tmp/case-interim/knob-20150714.stl I think this case has all the major parts now. Next: the electronics ... - Werner _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
