Search here: http://www.digikey.com/
This is where Soekris gets theirs from... Scott On 11/8/05, Mojo Jojo <[EMAIL PROTECTED]> wrote: > > Thanks for the info.. Anyone else have suggestions? > > I am not sure what I would pay for one of these new, could be pricey. > > I can probably find one on eBay but if I need new ones they may be out of my > price range. > > --Todd > > > > > ----- Original Message ----- > From: Bill Plein > To: [email protected] > Sent: Tuesday, November 08, 2005 12:48 PM > Subject: Re: [pfSense-discussion] WRAP Power Supply > > > On 11/8/05, Mojo Jojo <[EMAIL PROTECTED]> wrote: > > I ordered my enclosures through wisp-router and my boards, CF and power > > supply through SiliconKit. > > > > I am happy with all except the power supply which was horrible. > > > > The power supply powers the unit but barely stays plugged into the WRAP, > > very loose and flimsy. > > > > Can someone recommend a place to purchase a power supply that actually > stays > > plugged into the WRAP. > > > > Looking for a US supplier and a link would be great. > > > I don't have a link, but to let you know, the power adapters used for IBM > ThinkPads are ~excellent~, and I am using a spare one on my WRAP platform. > The connector is correct, and the adapter accepts 100-240 VAC 50-60Hz, with > an output power of 16VDC 0-4.55A So you can plug in anywhere with it! > > It probably draws more power than others, but it's a well built unit. They > come in various part numbers, but anything for a Thinkpad T40 or similar > will use the same connector and power. > > > -- > > Bill Plein >
