On Tue, Nov 06, 2007 at 10:59:25AM -0500, Chris Buechler wrote: > In a transparent bridge setup, the gateway of the hosts on the bridge > isn't going to be pfsense, it'll be something on the outside interface. > If you have a routed subnet setup on an OPT interface this will work fine.
Alas, the box has only two NICs. Is there something which would work with VIPs/VLANs? I also seem to have fried one of the mini-ITX C3 boards in my Travla C147 case (apparently, inserting a VGA cable with a few bent pins can do that to you). I was thinking about getting a Jetway C7 board with a 4-NIC daughtercard, but I'm not at all sure it would fit. http://www.mini-itx.com/store/?c=3 says "Jetway C7 boards will fit, but backplates are not available.". Anyone tried fitting Jetway C7 boards in there? Did it work? -- Eugen* Leitl <a href="http://leitl.org">leitl</a> http://leitl.org ______________________________________________________________ ICBM: 48.07100, 11.36820 http://www.ativel.com http://postbiota.org 8B29F6BE: 099D 78BA 2FD3 B014 B08A 7779 75B0 2443 8B29 F6BE