On Wed, May 23, 2018 at 04:37:18PM -1000, Joel Roth wrote: > Hi knowledgeable colleagues! > > I recently upgraded to ascii, due to some itch I can't > quite remember now ;-) > > Everything was fine, till I rebooted. > > I got some errors during boot: > > INIT: cannot execute "/usr/sbin/runsvdir-start" > (this line repeated) > > INIT: Id "SV" respawning too fast, disabled for 5 minutes > > Also, no such file, /usr/sbin/runsvdir-start: > > $ ls /usr/sbin/run* > > /usr/sbin/runq > /usr/sbin/runsvchdir > > Later, when I tried 'startx', the Xserver failed to start: > > xinit: giving up > xinit: unable to connect to X server > xinit: connection refused > > FWIW I did succeed to start X as root. > > For upgrading, I used this process: > > 1. modify /etc/apt/sources.list: > > deb http://pkgmaster.devuan.org/merged ascii main > deb http://pkgmaster.devuan.org/merged ascii-updates main > deb http://pkgmaster.devuan.org/merged ascii-security main > deb http://pkgmaster.devuan.org/merged ascii-backports main > > 2. apt-get update > 3. apt-get upgrade > 4. apt-get dist-upgrade > > I like to think I know a lot about linux by this time, > but still tend to get caught out when things go wrong :-/ > > Will appreciate any suggestions....
Some additional information. First, the hardware concerned is an i5 processor with Intel graphics, usually well supported by xorg. Second, I have no xorg.conf file that I know of, but find several files in /usr/share. I usually expect config files in /etc/ (or /etc/defaults/ ) /usr/share/X11/xorg.conf.d /usr/share/X11/xorg.conf.d/10-amdgpu.conf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/10-quirks.conf /usr/share/X11/xorg.conf.d/40-libinput.conf /usr/share/X11/xorg.conf.d/70-synaptics.conf /usr/share/doc/xserver-xorg-video-intel/xorg.conf Third, the Xorg log file (below), no longer in /var/log/Xorg* but now in ~/.local/share/xorg/Xorg.0.log [ 1208.047] X.Org X Server 1.19.2 Release Date: 2017-03-02 [ 1208.050] X Protocol Version 11, Revision 0 [ 1208.051] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian [ 1208.052] Current Operating System: Linux sprite 4.9.0-6-amd64 #1 SMP Debian 4.9.88-1+deb9u1 (2018-05-07) x86_64 [ 1208.052] Kernel command line: auto BOOT_IMAGE=Linux ro root=UUID=b4e1957f-d86d-483c-bbd6-ea5cfe535544 acpi_osi="!Windows 2012" [ 1208.055] Build Date: 16 October 2017 08:19:45AM [ 1208.056] xorg-server 2:1.19.2-1+deb9u2 (https://www.debian.org/support) [ 1208.057] Current version of pixman: 0.34.0 [ 1208.059] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 1208.059] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 1208.065] (==) Log file: "/home/jroth/.local/share/xorg/Xorg.0.log", Time: Wed May 23 16:24:00 2018 [ 1208.066] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 1208.066] (==) No Layout section. Using the first Screen section. [ 1208.066] (==) No screen section available. Using defaults. [ 1208.066] (**) |-->Screen "Default Screen Section" (0) [ 1208.066] (**) | |-->Monitor "<default monitor>" [ 1208.066] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 1208.066] (==) Automatically adding devices [ 1208.066] (==) Automatically enabling devices [ 1208.066] (==) Automatically adding GPU devices [ 1208.066] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 1208.066] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 1208.066] Entry deleted from font path. [ 1208.066] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 1208.066] (==) ModulePath set to "/usr/lib/xorg/modules" [ 1208.066] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 1208.066] (II) Loader magic: 0x55957c5d6e00 [ 1208.066] (II) Module ABI versions: [ 1208.066] X.Org ANSI C Emulation: 0.4 [ 1208.066] X.Org Video Driver: 23.0 [ 1208.066] X.Org XInput driver : 24.1 [ 1208.066] X.Org Server Extension : 10.0 [ 1208.067] (++) using VT number 2 [ 1208.067] (EE) systemd-logind: failed to get session: The name org.freedesktop.login1 was not provided by any .service files [ 1208.067] (II) xfree86: Adding drm device (/dev/dri/card0) [ 1208.070] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072 [ 1208.070] (II) LoadModule: "glx" [ 1208.070] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 1208.071] (II) Module glx: vendor="X.Org Foundation" [ 1208.071] compiled for 1.19.2, module version = 1.0.0 [ 1208.071] ABI class: X.Org Server Extension, version 10.0 [ 1208.071] (==) Matched modesetting as autoconfigured driver 0 [ 1208.071] (==) Matched fbdev as autoconfigured driver 1 [ 1208.071] (==) Matched vesa as autoconfigured driver 2 [ 1208.071] (==) Assigned the driver to the xf86ConfigLayout [ 1208.071] (II) LoadModule: "modesetting" [ 1208.071] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 1208.071] (II) Module modesetting: vendor="X.Org Foundation" [ 1208.071] compiled for 1.19.2, module version = 1.19.2 [ 1208.071] Module class: X.Org Video Driver [ 1208.071] ABI class: X.Org Video Driver, version 23.0 [ 1208.071] (II) LoadModule: "fbdev" [ 1208.071] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 1208.071] (II) Module fbdev: vendor="X.Org Foundation" [ 1208.071] compiled for 1.19.0, module version = 0.4.4 [ 1208.071] Module class: X.Org Video Driver [ 1208.071] ABI class: X.Org Video Driver, version 23.0 [ 1208.071] (II) LoadModule: "vesa" [ 1208.072] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 1208.072] (II) Module vesa: vendor="X.Org Foundation" [ 1208.072] compiled for 1.19.0, module version = 2.3.4 [ 1208.072] Module class: X.Org Video Driver [ 1208.072] ABI class: X.Org Video Driver, version 23.0 [ 1208.072] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 1208.072] (II) FBDEV: driver for framebuffer: fbdev [ 1208.072] (II) VESA: driver for VESA chipsets: vesa [ 1208.072] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted) [ 1208.085] (II) modeset(0): using drv /dev/dri/card0 [ 1208.085] (WW) Falling back to old probe method for fbdev [ 1208.085] (II) Loading sub module "fbdevhw" [ 1208.085] (II) LoadModule: "fbdevhw" [ 1208.085] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 1208.086] (II) Module fbdevhw: vendor="X.Org Foundation" [ 1208.086] compiled for 1.19.2, module version = 0.0.2 [ 1208.086] ABI class: X.Org Video Driver, version 23.0 [ 1208.086] (WW) Falling back to old probe method for vesa [ 1208.086] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 1208.086] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 1208.086] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 1208.086] (==) modeset(0): RGB weight 888 [ 1208.086] (==) modeset(0): Default visual is TrueColor [ 1208.086] (II) Loading sub module "glamoregl" [ 1208.086] (II) LoadModule: "glamoregl" [ 1208.086] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 1208.088] (II) Module glamoregl: vendor="X.Org Foundation" [ 1208.088] compiled for 1.19.2, module version = 1.0.0 [ 1208.088] ABI class: X.Org ANSI C Emulation, version 0.4 [ 1208.088] (II) glamor: OpenGL accelerated X.org driver based. [ 1208.096] (II) glamor: EGL version 1.4 (DRI2): [ 1208.098] (II) modeset(0): glamor initialized [ 1208.098] (II) modeset(0): Output LVDS-1 has no monitor section [ 1208.099] (II) modeset(0): Output VGA-1 has no monitor section [ 1208.312] (II) modeset(0): Output HDMI-1 has no monitor section [ 1208.312] (II) modeset(0): Output DP-1 has no monitor section [ 1208.313] (II) modeset(0): Output HDMI-2 has no monitor section [ 1208.315] (II) modeset(0): Output HDMI-3 has no monitor section [ 1208.315] (II) modeset(0): Output DP-2 has no monitor section [ 1208.315] (II) modeset(0): Output DP-3 has no monitor section [ 1208.315] (II) modeset(0): EDID for output LVDS-1 [ 1208.315] (II) modeset(0): Manufacturer: AUO Model: 213e Serial#: 0 [ 1208.315] (II) modeset(0): Year: 2010 Week: 33 [ 1208.315] (II) modeset(0): EDID Version: 1.4 [ 1208.315] (II) modeset(0): Digital Display Input [ 1208.315] (II) modeset(0): 6 bits per channel [ 1208.315] (II) modeset(0): Digital interface is undefined [ 1208.315] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17 [ 1208.315] (II) modeset(0): Gamma: 2.20 [ 1208.315] (II) modeset(0): No DPMS capabilities specified [ 1208.315] (II) modeset(0): Supported color encodings: RGB 4:4:4 [ 1208.315] (II) modeset(0): First detailed timing is preferred mode [ 1208.315] (II) modeset(0): Preferred mode is native pixel format and refresh rate [ 1208.315] (II) modeset(0): redX: 0.610 redY: 0.350 greenX: 0.320 greenY: 0.560 [ 1208.315] (II) modeset(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329 [ 1208.315] (II) modeset(0): Manufacturer's mask: 0 [ 1208.315] (II) modeset(0): Supported detailed timing: [ 1208.315] (II) modeset(0): clock: 110.0 MHz Image Size: 309 x 174 mm [ 1208.315] (II) modeset(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0 [ 1208.315] (II) modeset(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0 [ 1208.315] (II) modeset(0): Supported detailed timing: [ 1208.315] (II) modeset(0): clock: 73.3 MHz Image Size: 309 x 174 mm [ 1208.315] (II) modeset(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0 [ 1208.315] (II) modeset(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0 [ 1208.315] (II) modeset(0): AUO [ 1208.315] (II) modeset(0): B140RW02 V1 [ 1208.315] (II) modeset(0): EDID (in hex): [ 1208.315] (II) modeset(0): 00ffffffffffff0006af3e2100000000 [ 1208.315] (II) modeset(0): 21140104901f11780261959c59528f26 [ 1208.315] (II) modeset(0): 21505400000001010101010101010101 [ 1208.315] (II) modeset(0): 010101010101f82a409a61840c30402a [ 1208.315] (II) modeset(0): 330035ae10000018a51c409a61840c30 [ 1208.315] (II) modeset(0): 402a330035ae10000018000000fe0041 [ 1208.315] (II) modeset(0): 554f0a202020202020202020000000fe [ 1208.315] (II) modeset(0): 004231343052573032205631200a00d0 [ 1208.315] (II) modeset(0): Printing probed modes for output LVDS-1 [ 1208.315] (II) modeset(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP) [ 1208.315] (II) modeset(0): Modeline "1600x900"x40.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e) [ 1208.315] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d) [ 1208.315] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d) [ 1208.315] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d) [ 1208.315] (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d) [ 1208.315] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d) [ 1208.315] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 1208.315] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d) [ 1208.315] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d) [ 1208.315] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d) [ 1208.315] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d) [ 1208.315] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d) [ 1208.315] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d) [ 1208.315] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 1208.315] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 1208.315] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d) [ 1208.315] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d) [ 1208.315] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d) [ 1208.315] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) [ 1208.315] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) [ 1208.315] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d) [ 1208.315] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) [ 1208.315] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 1208.315] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d) [ 1208.315] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d) [ 1208.315] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d) [ 1208.315] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) [ 1208.315] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) [ 1208.315] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) [ 1208.315] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) [ 1208.316] (II) modeset(0): EDID for output VGA-1 [ 1208.532] (II) modeset(0): EDID for output HDMI-1 [ 1208.532] (II) modeset(0): EDID for output DP-1 [ 1208.533] (II) modeset(0): EDID for output HDMI-2 [ 1208.535] (II) modeset(0): EDID for output HDMI-3 [ 1208.535] (II) modeset(0): EDID for output DP-2 [ 1208.535] (II) modeset(0): EDID for output DP-3 [ 1208.535] (II) modeset(0): Output LVDS-1 connected [ 1208.535] (II) modeset(0): Output VGA-1 disconnected [ 1208.535] (II) modeset(0): Output HDMI-1 disconnected [ 1208.535] (II) modeset(0): Output DP-1 disconnected [ 1208.535] (II) modeset(0): Output HDMI-2 disconnected [ 1208.535] (II) modeset(0): Output HDMI-3 disconnected [ 1208.535] (II) modeset(0): Output DP-2 disconnected [ 1208.535] (II) modeset(0): Output DP-3 disconnected [ 1208.535] (II) modeset(0): Using exact sizes for initial modes [ 1208.535] (II) modeset(0): Output LVDS-1 using initial mode 1600x900 +0+0 [ 1208.535] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 1208.535] (==) modeset(0): DPI set to (96, 96) [ 1208.535] (II) Loading sub module "fb" [ 1208.535] (II) LoadModule: "fb" [ 1208.535] (II) Loading /usr/lib/xorg/modules/libfb.so [ 1208.535] (II) Module fb: vendor="X.Org Foundation" [ 1208.535] compiled for 1.19.2, module version = 1.0.0 [ 1208.535] ABI class: X.Org ANSI C Emulation, version 0.4 [ 1208.535] (II) UnloadModule: "fbdev" [ 1208.535] (II) Unloading fbdev [ 1208.535] (II) UnloadSubModule: "fbdevhw" [ 1208.535] (II) Unloading fbdevhw [ 1208.535] (II) UnloadModule: "vesa" [ 1208.535] (II) Unloading vesa [ 1208.535] (==) Depth 24 pixmap format is 32 bpp [ 1208.535] (EE) modeset(0): drmSetMaster failed: Permission denied [ 1208.535] (EE) Fatal server error: [ 1208.535] (EE) AddScreen/ScreenInit failed for driver 0 [ 1208.535] (EE) [ 1208.535] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 1208.535] (EE) Please also check the log file at "/home/jroth/.local/share/xorg/Xorg.0.log" for additional information. [ 1208.535] (EE) [ 1208.554] (EE) Server terminated with error (1). Closing log file. Hope this helps you to help me! I'm just an innocent user/administrator !! 8^) (Well, it was me that decided to upgrade :^) cheers, -- Joel Roth _______________________________________________ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
