On 4/25/22 10:17, k...@aspodata.se wrote:
Fred:
...
I ran gpm-mouse-test again. That program seems to have major
problems. It can't even detect the baud rate which I know to be 1200.
...
I tested it here and it succesfully detected my MouseMan at 1200baud.
It can be that your serial to usb converter confuses the program because
usb delivers bytes in a different way, in packets, not one byte at a time.
I might make a din-8 (aka sun mouse if.) to rs232 converter within the
month. If so I'll report back to you.
Regards,
/Karl Hammar
_______________________________________________
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Hi Karl,
I am using the DLP-TXRX-G usb/serial adapter with a transistor to invert
the mouse output. The mouse has an active high output and the dlp rx
input is active low.
I forgot to say in the previous message that x and y movement and
buttons 1 and 3 all work normally. Only the middle button doesn't work.
I have some hardware that would be fairly easy to have read in the mouse
signals and display the bytes. I will do this over the next few days
and it should be possible to determine the exact protocol.
Best regards,
Fred
_______________________________________________
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
