On 4 January 2024, Geert Stappers wrote: > > On Thu, Jan 04, 2024 at 08:08:46PM +0100, Luigi Baldoni wrote: > > > > I'm trying to get rid of a second (kea) dhcp server and > > hopefully be able to do everything I need with dnsmasq. > > > > The main hurdle, so far, is to run the nameserver only > > on eth1, because bind is listening on eth0, but have > > the dhcp server listen on both interfaces (and more). > > What has already been tried?
Done several tests and if I launch dnsmasq first then neither it nor bind will complain, but ss lists both listening on port 53 on the same interface. > Advice: Tell in the reply more about the network, such as > which IP-addresses are on the network interfaces. This is a map of my network: lan15 192.168.7.0/24 bind on 192.168.7.100 and dnsmasq dhcp on the same address (can be changed) lan30 192.168.8.0/24 dnsmasq dhcp on 192.168.8.150 lan45 192.168.11.0.24/ dnsmasq dhcp on 192.168.11.150 lan130 192.168.130.0/24 dnsmasq ns and dnsmasq dhcp on 192.168.130.200 lan166 192.168.166.0/24 dnsmasq dhcp on 192.168.166.200 Regards _______________________________________________ Dnsmasq-discuss mailing list Dnsmasq-discuss@lists.thekelleys.org.uk https://lists.thekelleys.org.uk/cgi-bin/mailman/listinfo/dnsmasq-discuss