Ok, I tested this with the snapshot for 27-Aug-10 and it did not work right. So the issue appears to be in the repository stylesheets.
The symptoms are that there are no number labeling at all except for the TOC. Can anyone confirm this? Here is the xml and style sheet: --------------- <?xml version="1.0" encoding="ISO-8859-1" standalone="no"?> <!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.docbook.org/xml/4.5/docbookx.dtd";> <chapter><title>Test</title> <section> <title>Calibration Schedule</title> <para>Check number 2 calibration using the <emphasis role="bold">froggy</emphasis> procedures. See <xref linkend="TCL-sys"/>. </para> </section> <section id="TCL-sys"> <title>Tension Control Link</title> <para>This system is used to verify calibration and provides a completely independent check of force measurement calibration. The Tension Calibration System is traceable to the U.S. National Institute of Standards and Technology. Needed to perform the calibration are two wood-faced steel paddles for insertion into the clamps, a tension load cell with steel pins for attachment to the paddles and a readout (TCL).</para> </section> </chapter> ----------------------------- Customization XSL ----------------------------- <?xml version="1.0" encoding="UTF-8"?> <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"; version="1.0" xmlns:fo="http://www.w3.org/1999/XSL/Format";> <!-- Include the company standard stylesheet --> <xsl:import href="../../doctools/docbook-xsl-1.75.2/fo/docbook.xsl"/> <xsl:param name="xref.with.number.and.title">1</xsl:param> <xsl:param name="section.label.includes.component.label">1</xsl:param> <xsl:param name="section.autolabel">1</xsl:param> <xsl:param name="section.autolabel.max.depth">10</xsl:param> <xsl:param name="chapter.autolabel">1</xsl:param> <xsl:param name="generate.section.toc.level">2</xsl:param> <xsl:param name="toc.max.depth" select="6"></xsl:param> <xsl:param name="label.from.part" select="1"></xsl:param> <xsl:param name="component.label.includes.part.label" select="1"></xsl:param> </xsl:stylesheet> In a message dated 09/03/10 11:56:21 Pacific Daylight Time, deannelson writes: Bob, I'm using just the simple xrefs with linkends pointing to IDs. That's what is so strange. OK I just did some testing with clean 1.75.2 and it works as advertised with and without my customization. I had done some updates to the 1.75.2 from the subversion that seems to have broken some of the labeling. So maybe I need to try the new release candidate first before I try to dig out the updates to 1.75.2. More later... Dean In a message dated 09/03/10 11:12:03 Pacific Daylight Time, b...@sagehill.net writes: Hi Dean, I can't duplicate you problem. I just tried a small customization that imports 1.75.2 and sets the params you listed, and I get xrefs to sections showing as: Section 1.2, "Section Title" So it seems to work in the base stylesheets, and I cannot tell what is going wrong on your system. Are you using xrefstyle attributes in your xrefs? Bob Stayton Sagehill Enterprises b...@sagehill.net ----- Original Message ----- From: deannelson To: docbook-apps@lists.oasis-open.org Sent: Friday, September 03, 2010 10:39 AM Subject: [docbook-apps] XREF text/label issue Hello, I have an issue that has either popped up or I just realized it. It has to do with the XREF in certain instances it does not display the numbered sections (i.e "see 1.2.3 Start Up Procedures"). This is correct when referencing figures and chapters, but it leaves off the number reference on sections and procedures and just leaves the title. I'm pretty sure I have done something silly in the customization so I tried a bare 1.75.2 stylesheet with the following additions but could not seem to activate the number references, so I can't really say for sure that it happens in the stock stylesheets. <xsl:param name="xref.with.number.and.title">1</xsl:param> <xsl:param name="section.label.includes.component.label">1</xsl:param> <xsl:param name="section.autolabel">1</xsl:param> <xsl:param name="section.autolabel.max.depth">10</xsl:param> <xsl:param name="chapter.autolabel">1</xsl:param> <xsl:param name="generate.section.toc.level">2</xsl:param> <xsl:param name="toc.max.depth" select="6"></xsl:param> <xsl:param name="label.from.part" select="1"></xsl:param> <xsl:param name="component.label.includes.part.label" select="1"></xsl:param> So two questions: 1. What do I need to do to activate the numbered references on the above customization. I would assume that the first line should do it? 2. Any ideas where to check? Is this a design issue in the DB XSL that I missed? Thanks Dean Nelson
