Thanks Chrisophe! It looks like it works in 1.75.2 but not in 1.76.0. Dean
In a message dated 09/03/10 20:20:32 Pacific Daylight Time, christophe.h...@free.fr writes: I confirm that : 1) sections are not numbered ; 2) generated text for XREF's : no "..." surrounding text (no << ... >> in French) ; number followed by a point, not a comma. Example : Figure 1.4. Les classes -- Christophe HARO christophe.h...@free.fr ---------------------------- ----- "deannelson" <deannel...@aol.com> a écrit : > Ok, I tested this with the snapshot for 27-Aug-10 and it did not work > right. So the issue appears to be in the repository stylesheets. > > The symptoms are that there are no number labeling at all except for > the TOC. > > Can anyone confirm this? > > Here is the xml and style sheet: > --------------- > <?xml version="1.0" encoding="ISO-8859-1" standalone="no"?> > <!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" " > http://www.docbook.org/xml/4.5/docbookx.dtd "> > > <chapter><title>Test</title> > <section> > <title>Calibration Schedule</title> > > <para>Check number 2 calibration using the <emphasis > role="bold">froggy</emphasis> > procedures. See <xref linkend="TCL-sys"/>. </para> > </section> > > <section id="TCL-sys"> > > <title>Tension Control Link</title> > > <para>This system is used to verify calibration and provides a > completely independent check > of force measurement calibration. The Tension Calibration System is > traceable to the U.S. > National Institute of Standards and Technology. Needed to perform the > calibration are two > wood-faced steel paddles for insertion into the clamps, a tension load > cell with steel pins > for attachment to the paddles and a readout (TCL).</para> > </section> > </chapter> > ----------------------------- > > Customization XSL > ----------------------------- > <?xml version="1.0" encoding="UTF-8"?> > <xsl:stylesheet xmlns:xsl=" http://www.w3.org/1999/XSL/Transform " > version="1.0" > xmlns:fo=" http://www.w3.org/1999/XSL/Format "> > > <!-- Include the company standard stylesheet --> > <xsl:import href="../../doctools/docbook-xsl-1.75.2/fo/docbook.xsl"/> > > <xsl:param name="xref.with.number.and.title">1</xsl:param> > <xsl:param name="section.label.includes.component.label">1</xsl:param> > <xsl:param name="section.autolabel">1</xsl:param> > <xsl:param name="section.autolabel.max.depth">10</xsl:param> > <xsl:param name="chapter.autolabel">1</xsl:param> > <xsl:param name="generate.section.toc.level">2</xsl:param> > <xsl:param name="toc.max.depth" select="6"></xsl:param> > > <xsl:param name="label.from.part" select="1"></xsl:param> > <xsl:param name="component.label.includes.part.label" > select="1"></xsl:param> > </xsl:stylesheet> > > > > > In a message dated 09/03/10 11:56:21 Pacific Daylight Time, deannelson > writes: > > > > Bob, > I'm using just the simple xrefs with linkends pointing to IDs. That's > what is so strange. > > OK I just did some testing with clean 1.75.2 and it works as > advertised with and without my customization. I had done some updates > to the 1.75.2 from the subversion that seems to have broken some of > the labeling. So maybe I need to try the new release candidate first > before I try to dig out the updates to 1.75.2. > > More later... > > Dean > > > In a message dated 09/03/10 11:12:03 Pacific Daylight Time, > b...@sagehill.net writes: > > > > Hi Dean, > I can't duplicate you problem. I just tried a small customization that > imports 1.75.2 and sets the params you listed, and I get xrefs to > sections showing as: > > Section 1.2, "Section Title" > > So it seems to work in the base stylesheets, and I cannot tell what is > going wrong on your system. Are you using xrefstyle attributes in your > xrefs? > > Bob Stayton > Sagehill Enterprises > b...@sagehill.net > > > > > ----- Original Message ----- > From: deannelson > To: docbook-apps@lists.oasis-open.org > Sent: Friday, September 03, 2010 10:39 AM > Subject: [docbook-apps] XREF text/label issue > > > Hello, > > I have an issue that has either popped up or I just realized it. It > has to do with the XREF in certain instances it does not display the > numbered sections (i.e "see 1.2.3 Start Up Procedures "). This is > correct when referencing figures and chapters, but it leaves off the > number reference on sections and procedures and just leaves the title. > > I'm pretty sure I have done something silly in the customization so I > tried a bare 1.75.2 stylesheet with the following additions but could > not seem to activate the number references, so I can't really say for > sure that it happens in the stock stylesheets. > > > <xsl:param name="xref.with.number.and.title">1</xsl:param> > <xsl:param name="section.label.includes.component.label">1</xsl:param> > <xsl:param name="section.autolabel">1</xsl:param> > <xsl:param name="section.autolabel.max.depth">10</xsl:param> > <xsl:param name="chapter.autolabel">1</xsl:param> > <xsl:param name="generate.section.toc.level">2</xsl:param> > <xsl:param name="toc.max.depth" select="6"></xsl:param> > > <xsl:param name="label.from.part" select="1"></xsl:param> > <xsl:param name="component.label.includes.part.label" > select="1"></xsl:param> > > > So two questions: > 1. What do I need to do to activate the numbered references on the > above customization. I would assume that the first line should do it? > 2. Any ideas where to check? Is this a design issue in the DB XSL that > I missed? > > Thanks > Dean Nelson --------------------------------------------------------------------- To unsubscribe, e-mail: docbook-apps-unsubscr...@lists.oasis-open.org For additional commands, e-mail: docbook-apps-h...@lists.oasis-open.org
