"Joe Roth" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
----------------------------------------------------------------------
I've added a lot of xtals to my R4C. I began to use position 11 which is now in the 3 (bottom most) row. The entire row for positions 11-15 will not work. The receiver acts as if the xtal sockets are empty. The xtal works fine in other positions. I've swapped all combinations around and I know there is a problem with the row. I looked at the obvious solder joints on the switch and traced the connections of 3 wires going to the underside of the chassis. Everything appears to be okay.
I now need to get in to it deeper and trace some lines with the VOM. Does anyone have suggestions to narrow things down?
TNX
Joe/N4ARI
www.n4ari.net
---------------------------------------------------------------------- On Behalf of "Joe Roth" <[EMAIL PROTECTED]> Submissions: drakelist@www.zerobeat.net Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: http://www.zerobeat.net Brought to you courtesy of TLCHost.net http://www.tlchost.net/ ----------------------------------------------------------------------
