"Peter Hoon" <[EMAIL PROTECTED]> made an utterance to the drakelist gang ---------------------------------------------------------------------- Kevin,
Fast and easy approach is to use a 9 volt transistor battery as your power source. Tack solder red/white wire to plus 9 VDC, black/white to - 9VDC. Measure RF out from the coax lead Numbers below are with shield on: With slug all the way out of the coil housing, you should see 1.15 V Pk-Pk on a scope, or about .40 V RMS With slug 2/3 of the way in, you should see 1.5 V Pk-Pk or .54 V RMS With slug 100 % of the way into the coil housing (as far as possible), you should see about 1.4 V Pk to Pk or .46 V RMS Sorry, don't have conversions of the above to dBm Let the list know if the numbers you get are similar to those above. Peter VE1CHS ---------------------------------------------------------------------- Submissions: drakelist@www.zerobeat.net Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net ----------------------------------------------------------------------