"Gerry" <[EMAIL PROTECTED]> made an utterance to the drakelist gang ---------------------------------------------------------------------- I once installed the R-4B passband tuning assembly/filter in my 2-B with excellent results. Therefore I should think it would be possible to do the same with the R-4 receivers except for the R-4C which doesn't use that system.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of neil Sent: Thursday, August 03, 2006 4:07 PM To: [email protected] Subject: [drakelist] PBT selector board - R4B neil <[EMAIL PROTECTED]> made an utterance to the drakelist gang ---------------------------------------------------------------------- Does anyone know if the passband width selector switch and its attached circuit board of capacitors in an R4B can be replaced with one from an R4? Or for that matter, if the entire R4 passband tuner assembly along with the switch can be swapped into the R4B? (T9 assembly on the schematics). Same frequency, and circuit context is similar. Thanks and 73, Neil KX2Y ---------------------------------------------------------------------- Submissions: [email protected] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net ---------------------------------------------------------------------- ---------------------------------------------------------------------- Submissions: [email protected] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net ----------------------------------------------------------------------
