"Jim Shorney" <[EMAIL PROTECTED]> made an utterance to the drakelist gang ---------------------------------------------------------------------- On Thu, 14 Dec 2006 08:13:18 -0600, Laird Tom N wrote:
>The hard part is lifting the connectors EVENLY to avoid bending the >board. I had a piece old copper 12ga. house wire that I bent the end >(J-hook) and used that to snake under the edge of the board next to the >press-in connectors Computer slot covers work pretty well also. Missing from your very instructive observations is the caution to be very aware of the pots on the DC-DC converter board, it is horribly easy to bump them when removing/installing the DR7. Even the slightest touch will knock one or more of these pots out of adjustment, and as more than one of us had found out, they are critical. 73 -Jim -- TR7/RV7, TR6/RV6, T4XC/R4C, L4B, NCL2000, SB104A, R390A, GT550A/RV550A - all vintage, all the time! ---------------------------------------------------------------------- Submissions: drakelist@www.zerobeat.net Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net ----------------------------------------------------------------------
