An excellent idea! That stuff is soft when it goes on, doesn't dry right away so I get a chance to position it correctly and adheres to almost any surface.
Thanks Eddy! 73 Wade VA3HM _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of EP Swynar Sent: April 12, 2008 3:47 PM To: [EMAIL PROTECTED] Subject: Re: [drakelist] Re-attaching Drake MS-4 Logo to Speaker Grill Hi Wade, A thin application of silicone sealant betwixt the two surfaces should do the job A-OK, and THEN some... ~73!~ Eddy VE3CUI - VE3XZ ************************************************* ----- Original Message ----- From: wmacleod <mailto:[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Sent: Saturday, April 12, 2008 3:29 PM Subject: [drakelist] Re-attaching Drake MS-4 Logo to Speaker Grill Hi Drakelist Does anyone have any suggestions on the best way to re-attach the Drake MS-4 Logo to the speaker grill? The original backing was a form of adhesive which has dried out over the years. I was thinking about the following alternatives: (1) Double sided tape - might leave a gap between the logo and the metal grill? (2) Soft glue stick like the kind used on scrapbook projects - would it last? (3) Crazy Glue - might be a problem if it did not adhere to the metal paint? Appreciate any recommendations. thanks Wade