On my schematic it shows R91 150 2W between C90C and C90B ? At any rate, I'm referring to the resistor that I found on the bottom of the can, between the two 100uF tabs.
Chuck, K1OM On Sat, Jul 24, 2010 at 11:14 PM, Garey Barrell <k4...@mindspring.com> wrote: > Chuck - > > I'm not sure what you are referring to, but R91 IS a 150 ohm, 2W resistor on > Board 5. > > The resistor across the bottom of the can is R136, and is a 1k, 1/2W. > > ?? > > Check my CD....... > > 73, Garey - K4OAH > Glen Allen, VA > > Drake 2-B, 4-B, C-Line& TR-4/C Service Supplement CDs > <www.k4oah.com> > > > Chuck Grandgent wrote: >> >> I'm doing the HayseedHamfest recapping on my R4B. >> >> What's the deal with R91, it goes between the two 100uF sections. >> What's it's purpose ? >> And, It's listed as 150 ohms, 2 Watts. But in mine, it looks like >> it's more like 1/2 watt, and looks pretty toasted, but it does test >> OK. >> >> I will also say, replacing that can is like doing a root canal on the R4B. >> >> Got it all done today, but haven't tested it yet, will do that tomorrow. >> >> Chuck, K1OM >> >> > > _______________________________________________ > Drakelist mailing list > Drakelist@zerobeat.net > http://mailman.zerobeat.net/mailman/listinfo/drakelist > _______________________________________________ Drakelist mailing list Drakelist@zerobeat.net http://mailman.zerobeat.net/mailman/listinfo/drakelist
