Are these not the same push buttons used on the rest of the 7 line? They should be plentiful. Who was looking for them?
73 Lee WB6SSW -----Original Message----- From: Curt Nixon <cptc...@flash.net> To: Don Cunningham <d...@martineer.net> Cc: drakelist <drakelist@zerobeat.net> Sent: Fri, Aug 19, 2011 10:57 pm Subject: Re: [Drakelist] MN2700 pushbuttons.... If you really must have an exact duplicate, if you have one good one, ou can use urethane casting resin. First, using the good part, you ake a mold set from silicone molding material, then cast the resin into he mold. I have made duplicate keyboard caps for specialty industrial utomation keyboards for CNC machines this way and you can't tell the ifference. It would cost in the area of 50-75 bucks for a kit with all aterials required. Expensive but a perfect match. Curt U8L Don Cunningham wrote: Fred, I should stress, use a LITTLE expxy on those lids or they are permanent, hi. Someone years ago went the trouble of somehow filling those hollow pen caps with a resin of some sorts and inserted shafts in the uncured resin and had a nice fit when they cured up. 73, Don, WB5HAK _______________________________________________ Drakelist mailing list Drakelist@zerobeat.net http://mailman.zerobeat.net/mailman/listinfo/drakelist ______________________________________________ rakelist mailing list rakel...@zerobeat.net ttp://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________ Drakelist mailing list Drakelist@zerobeat.net http://mailman.zerobeat.net/mailman/listinfo/drakelist