I'm not that C100 is still in this set. It has the Sherwood audio board in
it already.
The hiss definitely decreases when the RF GAIN is reduced and is affected by
the NOTCH.
Steve Wedge, W1ES/4
"I can't complain, but sometimes I still do."
- Joe Walsh
If the above message appears, it came from Steve's Son of Laptop!
----- Original Message -----
From: "Garey Barrell" <k4...@mindspring.com>
To: "Steve Wedge" <w1es1...@earthlink.net>
Cc: <henry.vredeg...@gmail.com>; <Drakelist@zerobeat.net>; <kc9...@aol.com>
Sent: Thursday, February 09, 2012 2:35 PM
Subject: Re: [Drakelist] Late R-4C 3rd Mixer Changes
Steve -
I found the 'C100 mod' to be more effective than the Schottky diode mod in
reducing 'hiss'.
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line
and TR-4/C Service Supplement CDs
<www.k4oah.com>
Steve Wedge wrote:
I'm considering it, Lee. This receiver is nowhere near stock as it is,
so I'm not wrecking a museum piece. It already has the Sherwood audio
amp and a homebrewed version of the power supply mods.
I'm going to try the simple mod first to see what I think. The
experimenting is half the fun.
Thanks for the input -
Steve Wedge, W1ES/4
"I can't complain, but sometimes I still do."
- Joe Walsh
If the above message appears, it came from Steve's Son of Laptop!
----- Original Message ----- From: <kc9...@aol.com>
To: <henry.vredeg...@gmail.com>; <Drakelist@zerobeat.net>
Sent: Thursday, February 09, 2012 11:36 AM
Subject: Re: [Drakelist] Late R-4C 3rd Mixer Changes
While some of the mods may not be that complex...some certainly are.
Considering the quality, components used and all the design work...they
are a bargain. Also, installation is not in all cases a walk in the
park...and will take a lot of time.
The roofing filter setup is complex and the parts are not cheap to buy.
Also, the AGC/filter selection switch fits nicely into the rx and is a
specially designed switch.
Have you guys really looked at what these several kits are??
So. I have a nice stock line for rag chew & original Drake design..And
I have a DX killing, contest capable C line that works as well or better
in some cases as a modern DSP high end rig. (less all the bells,
whistles and some neat interface features)
If, all you care about is fixing the 3rd mixer...issues..maybe you could
roll your own....or $59.00 a couple hours and it's done?
Just Call Rob and ask him about the 3rd mixer...he can explain all the
issues and how he solved them. Also...the power supply and audio amp mod
gets lots of heat out of there and I the stability is superb then.
IMHO, I still think a Hot Rod C line and a comletely stock B line is the
best of the Drake world....
73,
Lee
-----Original Message-----
From: Henry Vredegoor <henry.vredeg...@gmail.com>
To: Drakelist <Drakelist@zerobeat.net>
Sent: Thu, Feb 9, 2012 6:18 am
Subject: Re: [Drakelist] Late R-4C 3rd Mixer Changes
Hi Don, All,
Yes, that's probably the reason why I did not want to buy the kits.
It may be even more fun figuring out something like that myself......
;-)
73's,
Henry - PA0HJA
On 2/8/2012 8:04 PM, Don Cunningham wrote:
Henry,
If we saw the schematics, we probably wouldn't pay the price for the
kit, hi. That's his way of selling more.
73,
Don, WB5HAK
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist