Hi Paul,
Garey must have gone out for a long supper. Here's what he said about
5 yrs ago:
GAREY - K4OAH <k4...@mindspring.com> made an utterance to the drakelist gang
----------------------------------------------------------------------
Check your old relay. If it is a 15k ohm coil, you'll need to add a
1.5k, 1/2W resistor in series with the coil to replace it with the P&B
R10-E1Y4-V2.5K relay available from Mouser, Digi-Key and others. The
15k relays were unreliable because of the very fine wire required to get
the high impedance. The wire broke either at the terminals from
corrosion or inside the coil from temperature excursions. The
replacement is very reliable.
73, Garey - K4OAH
Atlanta
Drake 2-B, 4B & C Service Supplement CDs
<www.k4oah.com>
------------------------------------------------------
Since you don't have your old relay, maybe you should add a 15k res. &
see if it works. But maybe with your T-4XC it's late enough that the
replacement would have gone in at the factory. Butt -- Garey's old
response did have T-4XC in the subject.
73,
Al, W8UT
www.boatanchors.org
www.hammarlund.info
"There is nothing -- absolutely nothing -- half so much
worth doing as simply messing about in boats"
Ratty, to Mole
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
