On Tue, Mar 13, 2018 at 04:57:34PM +0100, Jdt wrote: > Le 13/03/2018 à 16:21, Roland Kammerer a écrit : > > > On Tue, Mar 13, 2018 at 04:07:17PM +0100, Jdt wrote: > >> Hi, > >> > >> We had a three nodes Proxmox cluster in V4 (jessie) with drbd from Proxmox. > >> I choose to reinitialize this cluster with Proxmox V5 (stretch) with > >> drbd from Linbit. > >> > >> I install Proxmox from the ISO image on the three nodes. Proxmox nodes > >> are not associated yet in a cluster. > >> I install drbdmanage-proxmox as indicated in > >> https://docs.linbit.com/docs/users-guide-9.0/#ch-proxmox > >> My network interfaces are well configured for drbd. > >> On the first node I create the drbdpool volume group as indicated in > >> https://docs.linbit.com/docs/users-guide-9.0/#s-dm-init-cluster > >> > >> But it's failed in initialization : > >> root@dmz-pve1:~ # drbdmanage init 192.168.2.10 > >> > >> You are going to initialize a new drbdmanage cluster. > >> CAUTION! Note that: > >> * Any previous drbdmanage cluster information may be removed > >> * Any remaining resources managed by a previous drbdmanage installation > >> that still exist on this system will no longer be managed by drbdmanage > >> > >> Confirm: > >> > >> yes/no: yes > >> Error: External command failed: > >> drbdsetup new-resource .drbdctrl 0 > >> Command output: > >> (stdout) > >> Command exited with exit_code 20 > >> > >> Initialization failed > > Failing at that early stage usually means that the wrong module is > > loaded. cat /proc/drbd > root@dmz-pve1:~ # cat /proc/drbd > version: 8.4.7 (api:1/proto:86-101) > srcversion: 2DCC561E7F1E3D63526E90D
Then I was right. drbdmanage always was drbd9 only. There should be a drbd-dkms module in our proxmox repo. Install that one and make sure it is loaded. Regards, rck _______________________________________________ drbd-user mailing list drbd-user@lists.linbit.com http://lists.linbit.com/mailman/listinfo/drbd-user