Hi Checked whether drbd9 module is loaded. cat /proc/drbd. It should say drbd9. I think you are still using the 8.4 version.
Shafeek On Mon, Mar 19, 2018 at 10:12 PM, Jdt <jean-daniel.tis...@univ-fcomte.fr> wrote: > > > Le 13/03/2018 à 17:05, Roland Kammerer a écrit : > > On Tue, Mar 13, 2018 at 04:57:34PM +0100, Jdt wrote: > > Le 13/03/2018 à 16:21, Roland Kammerer a écrit : > > > On Tue, Mar 13, 2018 at 04:07:17PM +0100, Jdt wrote: > > Hi, > > We had a three nodes Proxmox cluster in V4 (jessie) with drbd from Proxmox. > I choose to reinitialize this cluster with Proxmox V5 (stretch) with > drbd from Linbit. > > I install Proxmox from the ISO image on the three nodes. Proxmox nodes > are not associated yet in a cluster. > I install drbdmanage-proxmox as indicated > inhttps://docs.linbit.com/docs/users-guide-9.0/#ch-proxmox > My network interfaces are well configured for drbd. > On the first node I create the drbdpool volume group as indicated > inhttps://docs.linbit.com/docs/users-guide-9.0/#s-dm-init-cluster > > But it's failed in initialization : > root@dmz-pve1:~ # drbdmanage init 192.168.2.10 > > You are going to initialize a new drbdmanage cluster. > CAUTION! Note that: > * Any previous drbdmanage cluster information may be removed > * Any remaining resources managed by a previous drbdmanage installation > that still exist on this system will no longer be managed by drbdmanage > > Confirm: > > yes/no: yes > Error: External command failed: > drbdsetup new-resource .drbdctrl 0 > Command output: > (stdout) > Command exited with exit_code 20 > > Initialization failed > > Failing at that early stage usually means that the wrong module is > loaded. cat /proc/drbd > > root@dmz-pve1:~ # cat /proc/drbd > version: 8.4.7 (api:1/proto:86-101) > srcversion: 2DCC561E7F1E3D63526E90D > > Then I was right. drbdmanage always was drbd9 only. There should be a > drbd-dkms module in our proxmox repo. Install that one and make sure it > is loaded. > > > Thanks. I add pve-headers and drbd-dkms and I can initialize the new > drbdmanage cluster. > It will be nice to include this in https://docs.linbit.com/docs/ > users-guide-9.0/#ch-proxmox chapter. > But, I got a lot of messages on my syslog about PVE storage about every > ten seconds : > > Mar 19 18:54:02 dmz-pve1 pvestatd[1984]: Use of uninitialized value in > split at /usr/share/perl5/PVE/Storage/Custom/DRBDPlugin.pm line 217. > Mar 19 18:54:02 dmz-pve1 pvestatd[1984]: Use of uninitialized value > $free_space in multiplication (*) at > /usr/share/perl5/PVE/Storage/Custom/DRBDPlugin.pm > line 220. > Mar 19 18:54:02 dmz-pve1 pvestatd[1984]: Use of uninitialized value > $total_space in multiplication (*) at > /usr/share/perl5/PVE/Storage/Custom/DRBDPlugin.pm > line 221. > Mar 19 18:54:12 dmz-pve1 pvestatd[1984]: Use of uninitialized value in > split at /usr/share/perl5/PVE/Storage/Custom/DRBDPlugin.pm line 217. > Mar 19 18:54:12 dmz-pve1 pvestatd[1984]: Use of uninitialized value > $free_space in multiplication (*) at > /usr/share/perl5/PVE/Storage/Custom/DRBDPlugin.pm > line 220. > Mar 19 18:54:12 dmz-pve1 pvestatd[1984]: Use of uninitialized value > $total_space in multiplication (*) at > /usr/share/perl5/PVE/Storage/Custom/DRBDPlugin.pm > line 221. > Mar 19 18:54:22 dmz-pve1 pvestatd[1984]: Use of uninitialized value in > split at /usr/share/perl5/PVE/Storage/Custom/DRBDPlugin.pm line 217. > Mar 19 18:54:22 dmz-pve1 pvestatd[1984]: Use of uninitialized value > $free_space in multiplication (*) at > /usr/share/perl5/PVE/Storage/Custom/DRBDPlugin.pm > line 220. > Mar 19 18:54:22 dmz-pve1 pvestatd[1984]: Use of uninitialized value > $total_space in multiplication (*) at > /usr/share/perl5/PVE/Storage/Custom/DRBDPlugin.pm > line 221. > > In proxmox interface I have no idea of free space on my drbdpool VG. > Initialize the cluster create /dev/drbdpool/.drbdctrl_0 and > /dev/drbdpool/.drbdctrl_1. > For the moment no cluster are created for drbd and for proxmox. > > /etc/drbdmanaged.cfg contain : > [LOCAL] > storage-plugin = drbdmanage.storage.lvm_thinlv.LvmThinLv > force=1 > > and /etc/pve/storage.cfg : > dir: local > path /var/lib/vz > content iso,vztmpl,backup > > drbd: drbdstorage > content images,rootdir > redundancy 3 > > Any Ideas ? > Thanks in advance > > Regards, JdT > > > > > > > > _______________________________________________ > drbd-user mailing list > drbd-user@lists.linbit.com > http://lists.linbit.com/mailman/listinfo/drbd-user > > -- Shafeek SUMSER
_______________________________________________ drbd-user mailing list drbd-user@lists.linbit.com http://lists.linbit.com/mailman/listinfo/drbd-user