Hi
I am using the following packages:
pcs-0.9.162-5.el7.centos.1.x86_64
kmod-drbd84-8.4.11-1.el7_5.elrepo.x86_64
drbd84-utils-9.3.1-1.el7.elrepo.x86_64
pacemaker-1.1.18-11.el7_5.3.x86_64
corosync-2.4.3-2.el7_5.1.x86_64
targetcli-2.1.fb46-6.el7_5.noarch
my /etc/drbd.conf
global { usage-count no; }
common { protocol C; }
resource imagesdata {
on node1.san.localhost {
device /dev/drbd0;
disk /dev/vg_drbd/lv_drbd;
address 192.168.0.2:7789;
meta-disk internal;
}
on node2.san.localhost {
device /dev/drbd0;
disk /dev/vg_drbd/lv_drbd;
address 192.168.0.3:7789;
meta-disk internal;
}
}
my /etc/corosync/corosync.conf:
totem {
version: 2
secauth: off
cluster_name: san_cluster
transport: udpu
interface {
ringnumber: 0
bindnetaddr: 192.168.0.0
broadcast: yes
mcastport: 5405
}
}
nodelist {
node {
ring0_addr: node1.san.localhost
name: node1
nodeid: 1
}
node {
ring0_addr: node2.san.localhost
name: node2
nodeid: 2
}
}
quorum {
provider: corosync_votequorum
two_node: 1
wait_for_all: 1
last_man_standing: 1
auto_tie_breaker: 0
}
logging {
to_logfile: yes
logfile: /var/log/cluster/corosync.log
to_syslog: yes
}
Pacemaker setup:
pcs cluster auth node1.san.localdomain node2.san.localdomain -u hacluster -p
PASSWORD
pcs cluster setup --name san_cluster node1.san.localdomain node2.san.localdomain
pcs cluster start --all
pcs cluster enable --all
pcs property set stonith-enabled=false
pcs property set no-quorum-policy=ignore
The following command doesn't work:
pcs resource create my_iscsidata ocf:linbit:drbd drbd_resource=iscsidata op
monitor interval=10s
pcs resource master MyISCSIClone my_iscsidata master-max=1 master-node-max=1
clone-max=2 clone-node-max=1 notify=true
I receive the following on pcs status:
* my_iscsidata_monitor_0 on node2.san.localhost 'not configured' (6): call=9,
status=complete, exitreason='meta parameter misconfigured, expected clone-max
-le 2, but found unset.',
Regards
--
Jaco van Niekerk
Office: 011 608 2663 E-mail: j...@desktop.co.za
[Desktop]
accepts no liability for the content of this email, or for the consequences of
any actions taken on the basis of the information provided, unless that
information is subsequently confirmed in writing. If you are not the intended
recipient, you are notified that disclosing, copying, distributing or taking
any action in reliance on the contents of this information is strictly
prohibited.
Disclaimer added by CodeTwo Exchange Rules 2010
www.codetwo.com<http://www.codetwo.com/?sts=1048>
_______________________________________________
drbd-user mailing list
drbd-user@lists.linbit.com
http://lists.linbit.com/mailman/listinfo/drbd-user
