Hi Jaco, On Mon, Jul 23, 2018 at 11:10 PM, Jaco van Niekerk <j...@desktop.co.za> wrote:
> Hi > I am using the following packages: > pcs-0.9.162-5.el7.centos.1.x86_64 > kmod-drbd84-8.4.11-1.el7_5.elrepo.x86_64 > drbd84-utils-9.3.1-1.el7.elrepo.x86_64 > pacemaker-1.1.18-11.el7_5.3.x86_64 > corosync-2.4.3-2.el7_5.1.x86_64 > targetcli-2.1.fb46-6.el7_5.noarch > > my /etc/drbd.conf > global { usage-count no; } > common { protocol C; } > resource imagesdata { > on node1.san.localhost { > device /dev/drbd0; > disk /dev/vg_drbd/lv_drbd; > address 192.168.0.2:7789; > meta-disk internal; > } > on node2.san.localhost { > device /dev/drbd0; > disk /dev/vg_drbd/lv_drbd; > address 192.168.0.3:7789; > meta-disk internal; > } > } > > my /etc/corosync/corosync.conf: > totem { > version: 2 > secauth: off > cluster_name: san_cluster > transport: udpu > interface { > ringnumber: 0 > bindnetaddr: 192.168.0.0 > broadcast: yes > mcastport: 5405 > } > } > > nodelist { > node { > ring0_addr: node1.san.localhost > name: node1 > nodeid: 1 > } > > node { > ring0_addr: node2.san.localhost > name: node2 > nodeid: 2 > } > } > > quorum { > provider: corosync_votequorum > two_node: 1 > wait_for_all: 1 > last_man_standing: 1 > auto_tie_breaker: 0 > } > > logging { > to_logfile: yes > logfile: /var/log/cluster/corosync.log > to_syslog: yes > } > > Pacemaker setup: > pcs cluster auth node1.san.localdomain node2.san.localdomain -u hacluster > -p PASSWORD > pcs cluster setup --name san_cluster node1.san.localdomain > node2.san.localdomain > pcs cluster start --all > pcs cluster enable --all > pcs property set stonith-enabled=false > pcs property set no-quorum-policy=ignore > > The following command doesn't work: > pcs resource create my_iscsidata ocf:linbit:drbd > *drbd_resource=iscsidata* op monitor interval=10s > pcs resource master MyISCSIClone my_iscsidata master-max=1 > master-node-max=1 clone-max=2 clone-node-max=1 notify=true > > I receive the following on pcs status: > * my_iscsidata_monitor_0 on node2.san.localhost 'not configured' (6): > call=9, status=complete, exitreason='meta parameter misconfigured, expected > clone-max -le 2, but found unset.', > > I guess it's a typo. See the highlighted part above, *drbd_resource* has to match your DRBD resource you created which in your case would be *imagesdata*
_______________________________________________ drbd-user mailing list drbd-user@lists.linbit.com http://lists.linbit.com/mailman/listinfo/drbd-user