At Thu, 10 Mar 2011 06:50:09 +0100 (CET),
Indan Zupancic wrote:
>
> Hello,
>
> On Fri, March 4, 2011 19:47, Linus Torvalds wrote:
> > Alex, can you confirm that the revert of 951f3512dba5 plus the
> > one-liner patch from Takashi that Indan quoted also works for you?
> >
> > Linus
> >
> > On Thu, Mar 3, 2011 at 10:53 PM, Indan Zupancic <in...@nul.nu> wrote:
> >>
> >> So please revert my patch and apply Takashi Iwai's, which fixes the
> >> most immediate bug without changing anything else. This should go
> >> in stable too.
> >
>
> I found another backlight bug:
>
> When suspending intel_panel_disable_backlight() is never called,
> but intel_panel_enable_backlight() is called at resume. With the
> effect that if the brightness was ever changed after screen
> blanking, the wrong brightness gets restored.
>
> This explains the weird behaviour I've seen. I didn't see it with
> combination mode, because then the brightness is always the same
> (zero or the maximum, the BIOS only uses LBPC on my system.) I'll
> send a patch in a moment.
>
> Alternative for reverting the combination mode removal (I can also
> redo the patch against the revert and Takashi's patch, if that's
> preferred):
>
> --
>
> drm/i915: Do handle backlight combination mode specially
>
> Add back the combination mode check, but with slightly cleaner code
> and the weirdness removed: No val >>= 1, but also no val &= ~1. The
> old code probably confused bit 0 with BLM_LEGACY_MODE, which is bit 16.
> The other change is clearer calculations: Just check for zero level
> explicitly instead of avoiding the divide-by-zero.
>
> Signed-off-by: Indan Zupancic <in...@nul.nu>
>
> ---
>
> diff --git a/drivers/gpu/drm/i915/intel_panel.c
> b/drivers/gpu/drm/i915/intel_panel.c
> index d860abe..b05631a 100644
> --- a/drivers/gpu/drm/i915/intel_panel.c
> +++ b/drivers/gpu/drm/i915/intel_panel.c
> @@ -30,6 +30,10 @@
>
> #include "intel_drv.h"
>
> +#define PCI_LBPC 0xf4 /* legacy/combination backlight modes */
> +#define BLM_COMBINATION_MODE (1 << 30)
> +#define BLM_LEGACY_MODE (1 << 16)
> +
> void
> intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
> struct drm_display_mode *adjusted_mode)
> @@ -110,6 +114,22 @@ done:
> dev_priv->pch_pf_size = (width << 16) | height;
> }
>
> +/*
> + * What about gen 3? If there are no gen 3 systems with ASLE,
> + * then it doesn't matter, as we don't need to change the
> + * brightness. But then the gen 2 check can be removed too.
> + */
> +static int is_backlight_combination_mode(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> +
> + if (INTEL_INFO(dev)->gen >= 4)
> + return I915_READ(BLC_PWM_CTL2) & BLM_COMBINATION_MODE;
> + if (IS_GEN2(dev))
> + return I915_READ(BLC_PWM_CTL) & BLM_LEGACY_MODE;
> + return 0;
> +}
> +
> static u32 i915_read_blc_pwm_ctl(struct drm_i915_private *dev_priv)
> {
> u32 val;
> @@ -163,9 +183,12 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev)
> max >>= 17;
> } else {
> max >>= 16;
> + /* Ignore BLM_LEGACY_MODE bit */
> if (INTEL_INFO(dev)->gen < 4)
> max &= ~1;
> }
> + if (is_backlight_combination_mode(dev))
> + max *= 0xff;
> }
>
> DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max);
> @@ -183,6 +206,12 @@ u32 intel_panel_get_backlight(struct drm_device *dev)
> val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
> if (IS_PINEVIEW(dev))
> val >>= 1;
> + if (is_backlight_combination_mode(dev)){
> + u8 lbpc;
> +
> + pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc);
> + val *= lbpc;
> + }
> }
>
> DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val);
> @@ -205,6 +234,15 @@ void intel_panel_set_backlight(struct drm_device *dev,
> u32 level)
>
> if (HAS_PCH_SPLIT(dev))
> return intel_pch_panel_set_backlight(dev, level);
> +
> + if (level && is_backlight_combination_mode(dev)){
> + u32 max = intel_panel_get_max_backlight(dev);
> + u8 lpbc;
> +
> + lpbc = level * 0xff / max;
> + level /= lpbc;
Hmm, I don't think this calculation is correct. This would result
in level of opregion over its limit. For example, assume the level
max = 100, so total max = 25500. Passing level=150 here will be:
lbpc = 150 * 0xff / 25500 = 1.5 = 1
level = 150 / 1 = 150, which is over limit.
More worse, lbpc can be zero when level is below 100 in the case
above...
thanks,
Takashi
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
