[ Adding the dri-devel list ] On Mon, 2011-04-11 at 15:31 +0200, Gabriel Paubert wrote: > On Thu, Apr 07, 2011 at 04:04:35PM +0200, Michel Dänzer wrote: > > On Mit, 2011-04-06 at 22:43 +0200, Gabriel Paubert wrote: > > > > > > The probem is that, at least on one of my machines, the new driver > > > does not work: the system hangs (apparently solid, but it's before > > > networking starts up and I've not yet hooked up a serial console), > > > after the "radeon: ib pool ready" message. > > > > Does radeon.agpmode=-1 radeon.no_wb=1 help? > > > > You might be able to get more information via netconsole if you prevent > > the radeon module from loading automatically (or load it with > > radeon.modeset=0 first) and then load it e.g. via ssh with modeset=1. > > Loading the module with modeset=1 results in insmod blocked in > kernel state (not consuming CPU cycles either). The last kernel > message is always the same (ib pool ready). This seems to be > independent of agpmode and no_wb. The kernel messages when > loading the driver are: > > kernel: [drm] radeon kernel modesetting enabled. > kernel: checking generic (c0000000 140000) vs hw (c0000000 10000000) > kernel: fb: conflicting fb hw usage radeondrmfb vs OFfb vga,Displa - removing > generic driver > kernel: [drm] initializing kernel modesetting (RV530 0x1002:0x71C7). > kernel: radeon 0000:f1:00.0: Using 64-bit DMA iommu bypass > kernel: [drm] register mmio base: 0xE8000000 > kernel: [drm] register mmio size: 65536 > kernel: radeon 0000:f1:00.0: Invalid ROM contents > kernel: ATOM BIOS: X1650PRO > kernel: [drm] Generation 2 PCI interface, using max accessible memory > kernel: radeon 0000:f1:00.0: VRAM: 512M 0x0000000000000000 - > 0x000000001FFFFFFF (512M used) > kernel: radeon 0000:f1:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF > kernel: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > kernel: [drm] Driver supports precise vblank timestamp query. > kernel: irq: irq 9 on host /mpic mapped to virtual irq 24 > kernel: u3msi: allocated virq 0x18 (hw 0x9) addr 0xf8004090 > kernel: radeon 0000:f1:00.0: radeon: using MSI.
Have you ruled out any MSI related problems? I think the IRQ not working could explain the symptoms... > kernel: [drm] radeon: irq initialized. > kernel: [drm] Detected VRAM RAM=512M, BAR=256M > kernel: [drm] RAM width 128bits DDR > kernel: [TTM] Zone kernel: Available graphics memory: 1002914 kiB. > kernel: [TTM] Initializing pool allocator. > kernel: [drm] radeon: 512M of VRAM memory ready > kernel: [drm] radeon: 512M of GTT memory ready. > kernel: [drm] GART: num cpu pages 131072, num gpu pages 131072 > kernel: [drm] radeon: 1 quad pipes, 2 z pipes initialized. > kernel: [drm] PCIE GART of 512M enabled (table at 0x00040000). > kernel: radeon 0000:f1:00.0: WB enabled Make sure this line changes to 'WB disabled' with no_wb=1. There's a writeback endianness bug with modeset=1, see http://lists.freedesktop.org/archives/dri-devel/2011-April/009960.html . > kernel: [drm] Loading R500 Microcode > kernel: [drm] radeon: ring at 0x0000000020001000 > kernel: [drm] ring test succeeded in 6 usecs > kernel: [drm] radeon: ib pool ready. > For now, with modeset=0, agpmode=-1 and no_wb=1, the driver > seems to work. The agpmode and no_wb options only have an effect with modeset=1, and you don't seem to be using AGP anyway. :) -- Earthling Michel Dänzer | http://www.vmware.com Libre software enthusiast | Debian, X and DRI developer _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
