Hi Stefan, On 12/23/2014 04:33 PM, Stefan Wahren wrote: > Hi Liu, > >> Liu Ying <Ying.Liu at freescale.com> hat am 23. Dezember 2014 um 04:46 >> geschrieben: >> >> >> This patch adds Synopsys DesignWare MIPI DSI host controller driver support. >> Currently, the driver supports the burst with sync pulses mode only. >> >> Signed-off-by: Liu Ying <Ying.Liu at freescale.com> >> --- >> v2->v3: >> * Newly introduced in v3 to address Andy Yan's comment. This is based on >> the i.MX MIPI DSI driver in v2. To make the Synopsys DesignWare MIPI DSI >> host controller driver less platform-dependant, this patch places it at >> the drm/bridge directory as a DRM bridge driver. >> >> .../devicetree/bindings/drm/bridge/dw_mipi_dsi.txt | 72 ++ > > please take care of [1] and send the Documentation part as a separate patch. > This should also apply to all the other patches from your series.
All right, I'll do that. Thanks, Liu Ying > > Thanks > > Stefan > > [1] - > http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/submitting-patches.txt >