On 07/11/2014 09:18 AM, Ezequiel Garcia wrote: > Hello all, > > This patchset adds the required changes to support an optional backlight > and GPIO for the tilcdc panel driver. > > There was some code to support a backlight, but it was somewhat broken > and undocumented. I've followed the nice implementation in panel-simple > and added a similar one here. > > The enable GPIO is required to turn on and off devices with such capability. > Also here, I've followed panel-simple which looks correct. > > In addition to this there are very minor cosmetic cleanups and a larger > error path fix in tilcdc's DRM driver .load error path. > > This patchset applies on top of drm-next branch which contains the latest > tilcdc pushed by Guido. > > If at all possible, I'd like to get this merged for v3.17. If a pull request > is needed, don't hesitate to ask and I'll prepare one. > > Comments and tests welcome! >
All of the changes seem to make sense and I tested on AM335x-EVM both with and without the addition "backlight = " in the dts for the panel node. I see no issues in either case, continued to work as before. Tested against 3.16-rc6 with this patchset and the earlier patchset from Guido applied. Also tested on BeagleBone Black even though it doesn't have a panel, just to make sure nothing changed there. For the series: Tested-by: Darren Etheridge <detheridge at ti.com> > Ezequiel Garcia (8): > drm/tilcdc: Fix the error path in tilcdc_load() > drm/tilcdc: panel: Add missing of_node_put > drm/tilcdc: panel: Remove unused variable > drm/tilcdc: panel: Spurious whitespace removal > drm/tilcdc: panel: Use devm_kzalloc to simplify the error path > drm/tilcdc: panel: Fix backlight devicetree support > drm/tilcdc: panel: Set return value explicitly > drm/tilcdc: panel: Add support for enable GPIO > > .../devicetree/bindings/drm/tilcdc/panel.txt | 7 ++ > drivers/gpu/drm/tilcdc/tilcdc_drv.c | 60 +++++++++++++++--- > drivers/gpu/drm/tilcdc/tilcdc_panel.c | 74 > +++++++++++++++++----- > 3 files changed, 114 insertions(+), 27 deletions(-) >