On 06/19, Daniel Vetter wrote:
> On Thu, Jun 19, 2014 at 12:38 AM, Konrad Zapalowicz
> <bergo.torino at gmail.com> wrote:
> > This commit add check for return value of init_ring_common() in the
> > init_render_ring(). Now, when failure is detected the error code is
> > propagated to the caller layer instead of being ignored.
> >
> > I believe that this fix will have a positive impact on the oops that
> > I hit recently and which starts when init_ring_common() fails:
> >
> > [drm:init_ring_common] *ERROR* render ring initialization failed
> > ctl 0001f001 head 0000000c tail 00000000 start 003eb000
> > BUG: unable to handle kernel NULL pointer dereference at 0000006c
> > IP: [<f8ca1679>] i915_gem_obj_to_ggtt+0x9/0x40 [i915]
> >
> > Signed-off-by: Konrad Zapalowicz <bergo.torino at gmail.com>
>
> Do you have the full Oops somewhere?
Here you go, the Oops plus some usefull data:
1. Oops
2. lspci -vv
3. uname -a
4. Oops analysis
1. The Oops:
Jun 17 21:06:11 t400 kernel: [ 12.136049] [drm:init_ring_common] *ERROR*
render ring initialization failed ctl 0001f001 head 0000000c tail 00000000
start 003eb000
Jun 17 21:06:11 t400 kernel: [ 12.136081] BUG: unable to handle kernel NULL
pointer dereference at 0000006c
Jun 17 21:06:11 t400 kernel: [ 12.136086] IP: [<f8ca1679>]
i915_gem_obj_to_ggtt+0x9/0x40 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136118] *pdpt = 0000000033158001 *pde =
0000000000000000
Jun 17 21:06:11 t400 kernel: [ 12.136123] Oops: 0000 [#1] SMP
Jun 17 21:06:11 t400 kernel: [ 12.136127] Modules linked in: mac80211(E)
i915(E+) snd_hda_codec_conexant(E) snd_hda_codec_generic(E) snd_hda_intel(E)
snd_hda_controller(E) intel_gtt(E) snd_hda_codec(E) iwlwifi(E) i2c_algo_bit(E)
snd_hwdep(E) uvcvideo(E) thinkpad_acpi(E) drm_kms_helper(E) snd_pcm(E)
pcmcia(E) nvram(E) videobuf2_vmalloc(E) videobuf2_memops(E) videobuf2_core(E)
drm(E) psmouse(E) videodev(E) snd_seq_midi(E) snd_seq_midi_event(E)
snd_rawmidi(E) snd_seq(E) cfg80211(E) yenta_socket(E) snd_timer(E)
pcmcia_rsrc(E) serio_raw(E) snd_seq_device(E) pcmcia_core(E) snd(E) pl2303(E)
lpc_ich(E) ppdev(E) usb_storage(E) soundcore(E) usbserial(E) wmi(E) video(E)
tpm_tis(E) parport_pc(E) lp(E) parport(E) firewire_ohci(E) firewire_core(E)
crc_itu_t(E) ahci(E) libahci(E) e1000e(E) ptp(E) pps_core(E)
Jun 17 21:06:11 t400 kernel: [ 12.136187] CPU: 1 PID: 570 Comm: modprobe
Tainted: G E 3.15.0 #6
Jun 17 21:06:11 t400 kernel: [ 12.136191] Hardware name: LENOVO
6475FA4/6475FA4, BIOS 7UET79WW (3.09 ) 10/13/2009
Jun 17 21:06:11 t400 kernel: [ 12.136195] task: f3141b60 ti: f316a000
task.ti: f316a000
Jun 17 21:06:11 t400 kernel: [ 12.136199] EIP: 0060:[<f8ca1679>] EFLAGS:
00010282 CPU: 1
Jun 17 21:06:11 t400 kernel: [ 12.136223] EIP is at
i915_gem_obj_to_ggtt+0x9/0x40 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136227] EAX: 00000000 EBX: 00000004 ECX:
f2e6c000 EDX: fffffffb
Jun 17 21:06:11 t400 kernel: [ 12.136230] ESI: f2e6d174 EDI: 00000000 EBP:
f316bb50 ESP: f316bb4c
Jun 17 21:06:11 t400 kernel: [ 12.136234] DS: 007b ES: 007b FS: 00d8 GS:
0033 SS: 0068
Jun 17 21:06:11 t400 kernel: [ 12.136239] CR0: 8005003b CR2: 0000006c CR3:
33157000 CR4: 000407f0
Jun 17 21:06:11 t400 kernel: [ 12.136243] Stack:
Jun 17 21:06:11 t400 kernel: [ 12.136245] 00000004 f316bb68 f8ca16c5
f316bb80 00000004 f2e6d174 f2e794c0 f316bb80
Jun 17 21:06:11 t400 kernel: [ 12.136254] f8c9473e f2e6c000 f2e6c000
f32e5800 fffffffb f316bba0 f8c9ea49 00000000
Jun 17 21:06:11 t400 kernel: [ 12.136263] 00000000 f32e5838 f32e5800
00000000 f2e6c000 f316bca4 f8cf63a4 f8cf3c70
Jun 17 21:06:11 t400 kernel: [ 12.136271] Call Trace:
Jun 17 21:06:11 t400 kernel: [ 12.136297] [<f8ca16c5>]
i915_gem_object_ggtt_unpin+0x15/0x90 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136323] [<f8c9473e>]
i915_gem_context_fini+0x7e/0x130 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136349] [<f8c9ea49>]
i915_gem_init+0x69/0x1a0 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136381] [<f8cf63a4>]
i915_driver_load+0xa54/0xe50 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136411] [<f8cf3c70>] ?
i915_dma_init+0x2e0/0x2e0 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136419] [<c12ed1da>] ?
kobject_uevent_env+0xfa/0x510
Jun 17 21:06:11 t400 kernel: [ 12.136424] [<c12ed1da>] ?
kobject_uevent_env+0xfa/0x510
Jun 17 21:06:11 t400 kernel: [ 12.136429] [<c12ed050>] ?
add_uevent_var+0xd0/0xd0
Jun 17 21:06:11 t400 kernel: [ 12.136435] [<c13d11b4>] ? get_device+0x14/0x30
Jun 17 21:06:11 t400 kernel: [ 12.136440] [<c13d5a92>] ?
klist_class_dev_get+0x12/0x20
Jun 17 21:06:11 t400 kernel: [ 12.136447] [<c15f34c5>] ?
klist_node_init+0x35/0x50
Jun 17 21:06:11 t400 kernel: [ 12.136452] [<c15f35a0>] ?
klist_add_tail+0x20/0x50
Jun 17 21:06:11 t400 kernel: [ 12.136457] [<c13d1204>] ? put_device+0x14/0x20
Jun 17 21:06:11 t400 kernel: [ 12.136462] [<c13d27d7>] ?
device_add+0x167/0x530
Jun 17 21:06:11 t400 kernel: [ 12.136468] [<c12ec522>] ?
kobject_set_name_vargs+0x42/0x60
Jun 17 21:06:11 t400 kernel: [ 12.136485] [<f89ed12e>]
drm_dev_register+0x9e/0xf0 [drm]
Jun 17 21:06:11 t400 kernel: [ 12.136499] [<f89eee2f>]
drm_get_pci_dev+0x6f/0x1e0 [drm]
Jun 17 21:06:11 t400 kernel: [ 12.136521] [<f8c7f325>]
i915_pci_probe+0x35/0x60 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136528] [<c131f489>]
pci_device_probe+0x79/0xc0
Jun 17 21:06:11 t400 kernel: [ 12.136534] [<c11c3cd5>] ?
sysfs_create_link+0x25/0x40
Jun 17 21:06:11 t400 kernel: [ 12.136540] [<c13d4f04>]
driver_probe_device+0x64/0x200
Jun 17 21:06:11 t400 kernel: [ 12.136545] [<c131f3ce>] ?
pci_match_device+0x9e/0xb0
Jun 17 21:06:11 t400 kernel: [ 12.136550] [<c13d5131>]
__driver_attach+0x91/0xa0
Jun 17 21:06:11 t400 kernel: [ 12.136555] [<c13d50a0>] ?
driver_probe_device+0x200/0x200
Jun 17 21:06:11 t400 kernel: [ 12.136559] [<c13d3752>]
bus_for_each_dev+0x42/0x80
Jun 17 21:06:11 t400 kernel: [ 12.136564] [<c13d4a8e>]
driver_attach+0x1e/0x20
Jun 17 21:06:11 t400 kernel: [ 12.136569] [<c13d50a0>] ?
driver_probe_device+0x200/0x200
Jun 17 21:06:11 t400 kernel: [ 12.136575] [<c13d4714>]
bus_add_driver+0xd4/0x1d0
Jun 17 21:06:11 t400 kernel: [ 12.136580] [<c13d5719>]
driver_register+0x59/0xe0
Jun 17 21:06:11 t400 kernel: [ 12.136585] [<c131e8d3>]
__pci_register_driver+0x33/0x40
Jun 17 21:06:11 t400 kernel: [ 12.136590] [<f8b7c000>] ? 0xf8b7bfff
Jun 17 21:06:11 t400 kernel: [ 12.136603] [<f89ef08d>]
drm_pci_init+0xed/0x110 [drm]
Jun 17 21:06:11 t400 kernel: [ 12.136609] [<f8b7c000>] ? 0xf8b7bfff
Jun 17 21:06:11 t400 kernel: [ 12.136630] [<f8b7c062>] i915_init+0x62/0x64
[i915]
Jun 17 21:06:11 t400 kernel: [ 12.136636] [<c100048a>]
do_one_initcall+0xda/0x120
Jun 17 21:06:11 t400 kernel: [ 12.136641] [<f8b7c000>] ? 0xf8b7bfff
Jun 17 21:06:11 t400 kernel: [ 12.136646] [<c103652f>] ?
set_memory_nx+0x5f/0x70
Jun 17 21:06:11 t400 kernel: [ 12.136653] [<c15f7fbb>] ?
set_section_ro_nx+0x54/0x59
Jun 17 21:06:11 t400 kernel: [ 12.136659] [<c10ae4bb>]
load_module+0x1adb/0x21b0
Jun 17 21:06:11 t400 kernel: [ 12.136667] [<c160475a>] ? error_code+0x5a/0x60
Jun 17 21:06:11 t400 kernel: [ 12.136672] [<c10aec13>]
SyS_init_module+0x83/0xb0
Jun 17 21:06:11 t400 kernel: [ 12.136680] [<c160b84c>]
sysenter_do_call+0x12/0x22
Jun 17 21:06:11 t400 kernel: [ 12.136684] Code: f8 e8 ec de 39 c8 e9 36 ff ff
ff 66 ba 6d 09 b8 e0 8c d0 f8 e8 d9 de 39 c8 e9 ff fe ff ff 8d 74 26 00 55 89
e5 53 66 66 66 66 90 <8b> 50 6c 8d 48 6c 39 ca 74 1a 8b 40 08 8d 4a cc 8b 58 1c
31 c0
Jun 17 21:06:11 t400 kernel: [ 12.136725] EIP: [<f8ca1679>]
i915_gem_obj_to_ggtt+0x9/0x40 [i915] SS:ESP 0068:f316bb4c
Jun 17 21:06:11 t400 kernel: [ 12.136752] CR2: 000000000000006c
Jun 17 21:06:11 t400 kernel: [ 12.136757] ---[ end trace 3fff41670168a98f ]---
2. lspci -vv
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub (rev 07)
Subsystem: Lenovo Device 20e0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 20e4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f4400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f4200000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI
Controller (rev 07)
Subsystem: Lenovo Device 20e6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc326800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL
Redirection (rev 07) (prog-if 02 [16550])
Subsystem: Lenovo Device 20ec
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1830 [size=8]
Region 1: Memory at fc324000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network
Connection (rev 03)
Subsystem: Lenovo Device 20ee
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at fc100000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fc325000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 20f1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fc326c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 03)
Subsystem: Lenovo Device 20f2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 45
Region 0: Memory at fc320000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1
(rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0000000-c01fffff
Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2
(rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f4300000-f43fffff
Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3
(rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc000000-fc0fffff
Prefetchable memory behind bridge: 00000000c0600000-00000000c08fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4
(rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5
(rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f4100000-00000000f41fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 18c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 18e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1c00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 20f1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fc327000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if
01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
I/O behind bridge: 00005000-00008fff
Memory behind bridge: f4800000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Lenovo Device 20f5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port
SATA Controller [AHCI mode] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device 20f8
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 46
Region 0: I/O ports at 1c48 [size=8]
Region 1: I/O ports at 183c [size=4]
Region 2: I/O ports at 1c40 [size=8]
Region 3: I/O ports at 1838 [size=4]
Region 4: I/O ports at 1c20 [size=32]
Region 5: Memory at fc326000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Lenovo Device 20f9
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc327400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c60 [size=32]
03:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
Subsystem: Intel Corporation Device 1011
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f4300000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
04:00.0 Memory controller: Intel Corporation Turbo Memory Controller (rev 11)
Subsystem: Intel Corporation Device 4443
Physical Slot: 2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=1K]
Region 2: I/O ports at 2000 [size=256]
[virtual] Expansion ROM at c0600000 [disabled] [size=64K]
Capabilities: <access denied>
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
Subsystem: Lenovo Device 20c6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4800000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
Memory window 0: f0000000-f3ffffff (prefetchable)
Memory window 1: c4000000-c7ffffff
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
(prog-if 10 [OHCI])
Subsystem: Lenovo Device 20c7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f4801000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
3. uname
Linux t400 3.15.0 #6 SMP Sat Jun 14 21:07:35 CEST 2014 i686 i686 i686 GNU/Linux
4. Oops analysis
I have spent some time tracing down the source of the Oops. It turned
out that the failure is caused in list_empty() function which is used
by the i915_gem_obj_to_ggtt() function. The decoded code shows:
Code starting with the faulting instruction
===========================================
0: 8b 50 6c mov 0x6c(%eax),%edx <--- trapping
3: 8d 48 6c lea 0x6c(%eax),%ecx
6: 39 ca cmp %ecx,%edx
8: 74 1a je 0x24
a: 8b 40 08 mov 0x8(%eax),%eax
d: 8d 4a cc lea -0x34(%edx),%ecx
10: 8b 58 1c mov 0x1c(%eax),%ebx
13: 31 c0 xor %eax,%eax
Now the 0x6c offset corresponds to the vma_list member of struct
drm_i915_gem_object.
(gdb) print &((struct drm_i915_gem_object *)0)->vma_list
$1 = (struct list_head *) 0x6c <i915_free_hws+92>
So the Oops is because the vma_list has not been initialized. I
suspect, although not 100% sure, that the ringbuffer error has
something to do with it.
/Konrad
> > ---
> > drivers/gpu/drm/i915/intel_ringbuffer.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c
> > b/drivers/gpu/drm/i915/intel_ringbuffer.c
> > index 279488a..d205b0d 100644
> > --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
> > +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
> > @@ -604,6 +604,8 @@ static int init_render_ring(struct intel_engine_cs
> > *ring)
> > struct drm_device *dev = ring->dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > int ret = init_ring_common(ring);
> > + if (ret)
> > + return ret;
>
> Yeah, on gen5+ this looks needed.
> -Daniel
>
> >
> > /* WaTimedSingleVertexDispatch:cl,bw,ctg,elk,ilk,snb */
> > if (INTEL_INFO(dev)->gen >= 4 && INTEL_INFO(dev)->gen < 7)
> > --
> > 1.8.1.2
> >
>
>
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
