+Dave +Thierry On Thu, May 8, 2014 at 1:14 PM, Inki Dae <inki.dae at samsung.com> wrote: > > Just re-sending with text mode. Sorry for this. > > > On 2014? 05? 08? 15:41, Andrzej Hajda wrote: >> On 05/05/2014 09:52 PM, Ajay Kumar wrote: >>> This patchset is based on exynos-drm-next-todo branch of Inki Dae's tree at: >>> git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git >>> >>> I have just put up Rob's and Sean's idea of chaining up the bridges >>> in code, and have implemented basic panel controls as a chained bridge. >>> This works well with ptn3460 bridge chip on exynos5250-snow board. >>> >>> Still need to make use of standard list calls and figure out proper way >>> of deleting the bridge chain. So, this is just a rough version. >> >> As I understand this patchset tries to solve two things: >> 1. Implement panel as drm_bridge, to ease support for hardware chains: >> Crtc -> Encoder -> Bridge -> Panel >> 2. Add support to drm_bridge chaining, to allow software chains: >> drm_crtc -> drm_encoder -> drm_bridge -> drm_bridge,panel >> >> It is done using Russian doll schema, ops from the bridge calls the same >> ops from the next bridge and the next bridge ops can do the same. >> >> This schema means that all the bridges including the last one are seen >> from the drm core point of view as a one big drm_bridge. Additionally in >> this particular case, the first bridge (ptn3460) implements connector >> so it is hard to guess what is the location of the 2nd bridge in video >> stream chain, sometimes it is after the connector, sometimes before. >> All this is quite confusing. >> >> But if you look at the bridge from upstream video interface point of >> view it is just a panel, edp panel in case of ptn3460, ie ptn3460 on its >> video input side acts as a panel. On the output side it expects a panel, >> lvds panel in this case. >> >> So why not implement ptn3460 bridge as drm_panel which internally uses >> another drm_panel. With this approach everything fits much better. >> You do not need those (pre|post)_(enable|disable) calls, you do not need >> to implement connector in the bridge and you have a driver following >> linux driver model. And no single bit changed in drm core. >> >> I have implemented this way DSI/LVDS bridge, it was sent as RFC [1][2]. >> It was not accepted as Inki preferred drm_bridge but as I see the > > Yes, in above email threads, I disagreed to using drm_panel framework > for bridge device, especially, to implement connector/encoder to crtc > driver. > > However, I thought that it'd be more generic way that lvds drivers use > driver-model, and the use of drm_panel infrastructure would be suitable > to doing this. > > So my intention in turn, was that LVDS driver uses integrated drm_bridge > based on drm_panel infrastructure[1], and RFC patch[2] for it. This way > is same as your proposal in the point that LVDS and Panel drivers use > driver-model. The only different point is that LVDS driver has some ops > specific to LVDS device, not using existing ops of drm_panel commonly: > we may need to consider the characteristic of LVDS device. > > [1]:http://www.spinics.net/lists/dri-devel/msg55555.html > [2]:http://www.spinics.net/lists/dri-devel/msg55658.html > > Thanks, > Inki Dae I am just consolidating the discussion happening here. 1) This patchset started from a discussion wherein I tried to combine drm_panel with drm_bridge. https://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg28943.html 2) Sean and Rob suggested to implement a chain of bridges and then consider adding basic panel controls as a bridge. 3) Andrej's idea is to drop the existing bridge infrastructure and implement ptn3460 using drm_panel, the same way he has implemented http://permalink.gmane.org/gmane.linux.drivers.devicetree/61559. 4) Inki's suggestion is to combine drm_bridge, drm_panel and drm_enhance into a single drm_hw_block.
I am currently trying to implement (2):chaining of bridges, and I think we have not yet reached to a consensus. So adding few other people from drm community to comment. Regards, Ajay >> problems with drm_bridges I have decide to attract attention to much >> more cleaner solution. >> >> [1]: http://permalink.gmane.org/gmane.linux.drivers.devicetree/61559 >> [2]: http://permalink.gmane.org/gmane.linux.kernel.samsung-soc/27044 >> >> Regards >> Andrzej >> >> >>> >>> Ajay Kumar (3): >>> [RFC V2 1/3] drm: implement chaining of drm bridges >>> [RFC V2 2/3] drm/bridge: add a dummy panel driver to support lvds bridges >>> [RFC V2 3/3] drm/bridge: ptn3460: support bridge chaining >>> >>> .../bindings/drm/bridge/bridge_panel.txt | 45 ++++ >>> drivers/gpu/drm/bridge/Kconfig | 6 + >>> drivers/gpu/drm/bridge/Makefile | 1 + >>> drivers/gpu/drm/bridge/bridge_panel.c | 240 >>> +++++++++++++++++++++ >>> drivers/gpu/drm/bridge/ptn3460.c | 21 +- >>> drivers/gpu/drm/drm_crtc.c | 13 +- >>> include/drm/bridge/bridge_panel.h | 37 ++++ >>> include/drm/drm_crtc.h | 2 + >>> 8 files changed, 360 insertions(+), 5 deletions(-) >>> create mode 100644 >>> Documentation/devicetree/bindings/drm/bridge/bridge_panel.txt >>> create mode 100644 drivers/gpu/drm/bridge/bridge_panel.c >>> create mode 100644 include/drm/bridge/bridge_panel.h >>> >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" >> in >> the body of a message to majordomo at vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >