Add HDMI audio support. Adds mcasp0_pins, clk_mcasp0_fixed, clk_mcasp0, mcasp0, sound node, and updates the tda19988 node to follow the new binding.
Signed-off-by: Jyri Sarha <jsarha at ti.com> --- arch/arm/boot/dts/am335x-boneblack.dts | 90 ++++++++++++++++++++++++++++++++-- 1 file changed, 86 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index eadbba3..7d3e899 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -64,6 +64,16 @@ 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ >; }; + + mcasp0_pins: mcasp0_pins { + pinctrl-single,pins = < + 0x1ac (PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */ + 0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ + 0x194 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + 0x190 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + 0x06c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; }; &lcdc { @@ -76,17 +86,89 @@ }; &i2c0 { - tda19988 { + tda19988: tda19988 { compatible = "nxp,tda998x"; reg = <0x70>; + + #sound-dai-cells = <0>; + pinctrl-names = "default", "off"; pinctrl-0 = <&nxp_hdmi_bonelt_pins>; pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; - port { - hdmi_0: endpoint at 0 { - remote-endpoint = <&lcdc_0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port at 0 { + port-type = "rgb"; + reg = <0x230145>; + hdmi_0: endpoint at 0 { + remote-endpoint = <&lcdc_0>; + }; }; + port at 1 { + port-type = "i2s"; + reg = <0x03>; + tda19988_i2s: endpoint { + remote-endpoint = <&mcasp0_i2s>; + }; + }; + }; + }; +}; + +&rtc { + system-power-controller; +}; + +&mcasp0 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + status = "okay"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; + + port { + mcasp0_i2s: endpoint { + remote-endpoint = <&tda19988_i2s>; + }; + }; +}; + +/ { + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "TI BeagleBone Black"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + + dailink0_master: simple-audio-card,cpu { + sound-dai = <&mcasp0>; + clocks = <&clk_mcasp0>; + }; + + simple-audio-card,codec { + sound-dai = <&tda19988>; }; }; }; -- 1.9.1