On 2015. 8. 19., at PM 11:52, Yakir Yang <ykk at rock-chips.com> wrote: >
What is the reason to make this patch? Please make commit message including the reason. Best regards, Jingoo Han > Signed-off-by: Yakir Yang <ykk at rock-chips.com> > --- > Changes in v3: > - move dp hpd detect to connector detect function. > > Changes in v2: None > > drivers/gpu/drm/bridge/analogix_dp_core.c | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/analogix_dp_core.c > b/drivers/gpu/drm/bridge/analogix_dp_core.c > index 75dd44a..052b9b3 100644 > --- a/drivers/gpu/drm/bridge/analogix_dp_core.c > +++ b/drivers/gpu/drm/bridge/analogix_dp_core.c > @@ -915,12 +915,6 @@ static void analogix_dp_commit(struct analogix_dp_device > *dp) > DRM_ERROR("failed to disable the panel\n"); > } > > - ret = analogix_dp_detect_hpd(dp); > - if (ret) { > - /* Cable has been disconnected, we're done */ > - return; > - } > - > ret = analogix_dp_handle_edid(dp); > if (ret) { > dev_err(dp->dev, "unable to handle edid\n"); > @@ -953,6 +947,12 @@ static void analogix_dp_commit(struct analogix_dp_device > *dp) > static enum drm_connector_status analogix_dp_detect( > struct drm_connector *connector, bool force) > { > + struct analogix_dp_device *dp = connector_to_dp(connector); > + > + if (analogix_dp_detect_hpd(dp)) > + /* Cable has been disconnected, we're done */ > + return connector_status_disconnected; > + > return connector_status_connected; > } > > -- > 1.9.1 > >