Hi Hai, I don't know what those bits are used for, but I'm a bit curious about how did you find them?
Also, the next time don't forget to send patches related to envytools to nouveau at lists.freedesktop.org (or better send a pull request from github). Thanks. On 08/13/2015 11:44 PM, Hai Li wrote: > More registers and bit fields are added for PHY timings > and bitclk source selection. > > Signed-off-by: Hai Li <hali at codeaurora.org> > --- > rnndb/dsi/dsi.xml | 11 +++++++++-- > 1 file changed, 9 insertions(+), 2 deletions(-) > > diff --git a/rnndb/dsi/dsi.xml b/rnndb/dsi/dsi.xml > index 02cfa3b..956f3ff 100644 > --- a/rnndb/dsi/dsi.xml > +++ b/rnndb/dsi/dsi.xml > @@ -217,6 +217,9 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ > rules-ng.xsd"> > <reg32 offset="0x00128" name="PHY_RESET"> > <bitfield name="RESET" pos="0" type="boolean"/> > </reg32> > + <reg32 offset="0x0017c" name="T_CLK_PRE_EXTEND"> > + <bitfield name="INC_BY_2_BYTECLK" pos="0" type="boolean"/> > + </reg32> > <reg32 offset="0x001d0" name="RDBK_DATA_CTRL"> > <bitfield name="COUNT" low="16" high="23" type="uint"/> > <bitfield name="CLR" pos="0" type="boolean"/> > @@ -437,7 +440,9 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ > rules-ng.xsd"> > <reg32 offset="0x001c4" name="BIST_CTRL_4"/> > <reg32 offset="0x001c8" name="BIST_CTRL_5"/> > > - <reg32 offset="0x001d4" name="GLBL_TEST_CTRL"/> > + <reg32 offset="0x001d4" name="GLBL_TEST_CTRL"> > + <bitfield name="BITCLK_HS_SEL" pos="0" type="boolean"/> > + </reg32> > <reg32 offset="0x001dc" name="LDO_CNTRL"/> > </domain> > > @@ -608,7 +613,9 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ > rules-ng.xsd"> > <reg32 offset="0x001c4" name="BIST_CTRL_4"/> > <reg32 offset="0x001c8" name="BIST_CTRL_5"/> > > - <reg32 offset="0x001d4" name="GLBL_TEST_CTRL"/> > + <reg32 offset="0x001d4" name="GLBL_TEST_CTRL"> > + <bitfield name="BITCLK_HS_SEL" pos="0" type="boolean"/> > + </reg32> > <reg32 offset="0x001dc" name="LDO_CNTRL"/> > </domain> >