Add DCU node, DCU is a display controller of Freescale
named 2D-ACE.

Signed-off-by: Alison Wang <b18965 at freescale.com>
Signed-off-by: Xiubo Li <lixiubo at cmss.chinamobile.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn at gmail.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c70bb27..6d6e3e2 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -383,6 +383,16 @@
                                 <&platform_clk 1>;
                };

+               dcu: dcu at 2ce0000 {
+                       compatible = "fsl,ls1021a-dcu";
+                       reg = <0x0 0x2ce0000 0x0 0x10000>;
+                       interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&platform_clk 0>;
+                       clock-names = "dcu";
+                       big-endian;
+                       status = "disabled";
+               };
+
                mdio0: mdio at 2d24000 {
                        compatible = "gianfar";
                        device_type = "mdio";
-- 
2.1.0.27.g96db324

Reply via email to