Introduce dw_hdmi_set_sample_rate(), which allows us to configure the
audio sample rate, setting the CTS/N values appropriately.
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
drivers/gpu/drm/bridge/dw_hdmi.c | 10 ++++++++++
include/drm/bridge/dw_hdmi.h | 5 +++++
2 files changed, 15 insertions(+)
diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index 06b5583140a8..245d17e58dec 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -366,6 +366,16 @@ static void hdmi_clk_regenerator_update_pixel_clock(struct
dw_hdmi *hdmi)
mutex_unlock(&hdmi->audio_mutex);
}
+void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate)
+{
+ mutex_lock(&hdmi->audio_mutex);
+ hdmi->sample_rate = rate;
+ hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mpixelclock,
+ hdmi->sample_rate, hdmi->ratio);
+ mutex_unlock(&hdmi->audio_mutex);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_set_sample_rate);
+
/*
* this submodule is responsible for the video data synchronization.
* for example, for RGB 4:4:4 input, the data map is defined as
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index 5a4f49005169..424b51f6a215 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -12,6 +12,8 @@
#include <drm/drmP.h>
+struct dw_hdmi;
+
enum {
DW_HDMI_RES_8,
DW_HDMI_RES_10,
@@ -58,4 +60,7 @@ int dw_hdmi_bind(struct device *dev, struct device *master,
void *data, struct drm_encoder *encoder,
struct resource *iores, int irq,
const struct dw_hdmi_plat_data *plat_data);
+
+void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate);
+
#endif /* __IMX_HDMI_H__ */
--
1.8.3.1
