This patch adds the documentation for rockchip rk3399 dmc driver.
Signed-off-by: Lin Huang <hl at rock-chips.com>
---
Changes in v6:
-Add more detail in Documentation
Changes in v5:
-None
Changes in v4:
-None
Changes in v3:
-None
Changes in v2:
-None
Changes in v1:
-None
.../devicetree/bindings/devfreq/rk3399_dmc.txt | 84 ++++++++++++++++++++++
1 file changed, 84 insertions(+)
create mode 100644 Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
new file mode 100644
index 0000000..e73067c
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
@@ -0,0 +1,84 @@
+* Rockchip rk3399 DMC(Dynamic Memory Controller) device
+
+Required properties:
+- compatible: Must be "rockchip,rk3399-dmc".
+- devfreq-events: Node to get ddr loading, Refer to
+ Documentation/devicetree/bindings/devfreq/rockchip-dif.txt
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+ depends on the interrupt controller. it should be dcf interrupts,
+ when ddr dvfs finish, it will happen.
+- clocks: Phandles for clock specified in "clock-names" property
+- clock-names : The name of clock used by the DFI, must be "pclk_ddr_mon";
+- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt
+ for details.
+- center-supply: Dmc supply node.
+- status: Marks the node enabled/disabled.
+
+Optional properties:
+- ddr_timing: ddr timing need to pass to arm trust firmware
+- upthreshold: the upthreshold to simpleondeamnd policy
+- downdifferential: The downdifferential to simpleondeamnd policy
+
+Example:
+ ddr_timing: ddr_timing {
+ compatible = "rockchip,ddr-timing";
+ ddr3_speed_bin = <21>;
+ pd_idle = <0>;
+ sr_idle = <0>;
+ sr_mc_gate_idle = <0>;
+ srpd_lite_idle = <0>;
+ standby_idle = <0>;
+ dram_dll_dis_freq = <300>;
+ phy_dll_dis_freq = <125>;
+
+ ddr3_odt_dis_freq = <333>;
+ ddr3_drv = <DDR3_DS_40ohm>;
+ ddr3_odt = <DDR3_ODT_120ohm>;
+ phy_ddr3_ca_drv = <PHY_DRV_ODT_40>;
+ phy_ddr3_dq_drv = <PHY_DRV_ODT_40>;
+ phy_ddr3_odt = <PHY_DRV_ODT_240>;
+
+ lpddr3_odt_dis_freq = <333>;
+ lpddr3_drv = <LP3_DS_34ohm>;
+ lpddr3_odt = <LP3_ODT_240ohm>;
+ phy_lpddr3_ca_drv = <PHY_DRV_ODT_40>;
+ phy_lpddr3_dq_drv = <PHY_DRV_ODT_40>;
+ phy_lpddr3_odt = <PHY_DRV_ODT_240>;
+
+ lpddr4_odt_dis_freq = <333>;
+ lpddr4_drv = <LP4_PDDS_60ohm>;
+ lpddr4_dq_odt = <LP4_DQ_ODT_40ohm>;
+ lpddr4_ca_odt = <LP4_CA_ODT_40ohm>;
+ phy_lpddr4_ca_drv = <PHY_DRV_ODT_40>;
+ phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>;
+ phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>;
+ phy_lpddr4_odt = <PHY_DRV_ODT_60>;
+ };
+
+ dmc_opp_table: dmc_opp_table {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <900000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <666000000>;
+ opp-microvolt = <900000>;
+ };
+ };
+
+ dmc: dmc {
+ compatible = "rockchip,rk3399-dmc";
+ devfreq-events = <&dfi>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_DDRCLK>;
+ clock-names = "dmc_clk";
+ ddr_timing = <&ddr_timing>;
+ operating-points-v2 = <&dmc_opp_table>;
+ center-supply = <&ppvar_centerlogic>;
+ upthreshold = <15>;
+ downdifferential = <10>;
+ status = "disabled";
+ };
+
--
2.6.6
