Hi,
On 08/30/2016 12:50 AM, Randy Li wrote: > It is actually a lvds panel connected through a rga-lvds bridge. > But I really have no idea about what does a port mean in fimd node. > > Also how should I configure this panel size? I think the i2c found > on the panel schematic, but it more likely to be used a touch screen > touth. Also the touch screen is not supported in currently driver. > > Signed-off-by: Randy Li <ayaka at soulik.info> > --- > arch/arm/boot/dts/exynos4412-itop-elite.dts | 35 > ++++++++++++++++++++++++++--- > 1 file changed, 32 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts > b/arch/arm/boot/dts/exynos4412-itop-elite.dts > index e1cda54..2d67385 100644 > --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts > +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts > @@ -139,6 +139,20 @@ > assigned-clocks = <&clock CLK_MOUT_CAM0>; > assigned-clock-parents = <&clock CLK_XUSBXTI>; > }; > + > + vcc_sys_lcd: sys-lcd { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_5v"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; > + }; > + > + panel: panel { > + ddc-i2c-bus = <&i2c_3>; > + power-supply = <&vcc_sys_lcd>; > + enable-gpios = <&gpl0 2 GPIO_ACTIVE_HIGH>; > + }; Panel has no compatible string, which driver will handle this node? Regards Andrzej > }; > > &pinctrl_1 { > @@ -221,9 +235,6 @@ > }; > > &pwm { > - pinctrl-0 = <&pwm1_out>; > - pinctrl-names = "default"; > - samsung,pwm-outputs = <1>; > status = "okay"; > }; > > @@ -239,3 +250,21 @@ > assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; > assigned-clock-rates = <0>, <176000000>; > }; > + > +&i2c_3 { > + status = "okay"; > +}; > + > +&fimd { > + pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; > + pinctrl-names = "default"; > + status = "okay"; > + #address-cells = <1>; > + #size-cells = <0>; > + port at 0 { > + reg = <0>; > + rga_lvds: endpoint { > + remote-endpoint = <&panel>; > + }; > + }; > +};