This adds a new function intel_drm_get_valid_edid, which attempts to detect EDID values from available devices and returns quickly in case no connection is present. We detect non-existing devices by checking the i2c_transfer status, and if it fails with the -ENXIO result, we know that the i2c_algo_bit was unable to locate the hardware, so we give up on further edid discovery.
This should improve the edid detection timeouts by about 10-30% in most cases, and by a much larger margin in case of broken or phantom outputs https://bugs.freedesktop.org/show_bug.cgi?id=41059. This also removes intel_ddc_probe, whose functionality is now done by intel_drm_get_valid_edid. Signed-off-by: Eugeni Dodonov <eugeni.dodo...@intel.com> --- drivers/gpu/drm/i915/intel_crt.c | 46 ++++++++++++++++++------------------ drivers/gpu/drm/i915/intel_dp.c | 4 +- drivers/gpu/drm/i915/intel_drv.h | 3 +- drivers/gpu/drm/i915/intel_hdmi.c | 4 +- drivers/gpu/drm/i915/intel_i2c.c | 42 ++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_lvds.c | 2 +- drivers/gpu/drm/i915/intel_modes.c | 29 +---------------------- drivers/gpu/drm/i915/intel_sdvo.c | 4 +- 8 files changed, 75 insertions(+), 59 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 0979d88..3b55fdf 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -273,36 +273,36 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector) { struct intel_crt *crt = intel_attached_crt(connector); struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private; + struct edid *edid = NULL; + bool is_digital = false; /* CRT should always be at 0, but check anyway */ if (crt->base.type != INTEL_OUTPUT_ANALOG) return false; - if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) { - struct edid *edid; - bool is_digital = false; + edid = intel_drm_get_valid_edid(connector, + &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter); + if (!edid) + return false; - edid = drm_get_edid(connector, - &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter); - /* - * This may be a DVI-I connector with a shared DDC - * link between analog and digital outputs, so we - * have to check the EDID input spec of the attached device. - * - * On the other hand, what should we do if it is a broken EDID? - */ - if (edid != NULL) { - is_digital = edid->input & DRM_EDID_INPUT_DIGITAL; - connector->display_info.raw_edid = NULL; - kfree(edid); - } + /* + * This may be a DVI-I connector with a shared DDC + * link between analog and digital outputs, so we + * have to check the EDID input spec of the attached device. + * + * On the other hand, what should we do if it is a broken EDID? + */ + if (edid != NULL) { + is_digital = edid->input & DRM_EDID_INPUT_DIGITAL; + connector->display_info.raw_edid = NULL; + kfree(edid); + } - if (!is_digital) { - DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n"); - return true; - } else { - DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n"); - } + if (!is_digital) { + DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n"); + return true; + } else { + DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n"); } return false; diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 44fef5e..dd0d8b1 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1715,7 +1715,7 @@ intel_dp_detect(struct drm_connector *connector, bool force) if (intel_dp->force_audio) { intel_dp->has_audio = intel_dp->force_audio > 0; } else { - edid = drm_get_edid(connector, &intel_dp->adapter); + edid = intel_drm_get_valid_edid(connector, &intel_dp->adapter); if (edid) { intel_dp->has_audio = drm_detect_monitor_audio(edid); connector->display_info.raw_edid = NULL; @@ -1772,7 +1772,7 @@ intel_dp_detect_audio(struct drm_connector *connector) struct edid *edid; bool has_audio = false; - edid = drm_get_edid(connector, &intel_dp->adapter); + edid = intel_drm_get_valid_edid(connector, &intel_dp->adapter); if (edid) { has_audio = drm_detect_monitor_audio(edid); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index fe1099d..0e4b823 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -264,8 +264,9 @@ struct intel_fbc_work { int interval; }; +struct edid * intel_drm_get_valid_edid(struct drm_connector *connector, + struct i2c_adapter *adapter); int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter); -extern bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus); extern void intel_attach_force_audio_property(struct drm_connector *connector); extern void intel_attach_broadcast_rgb_property(struct drm_connector *connector); diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 226ba83..714f2fb 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -329,7 +329,7 @@ intel_hdmi_detect(struct drm_connector *connector, bool force) intel_hdmi->has_hdmi_sink = false; intel_hdmi->has_audio = false; - edid = drm_get_edid(connector, + edid = intel_drm_get_valid_edid(connector, &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter); if (edid) { @@ -371,7 +371,7 @@ intel_hdmi_detect_audio(struct drm_connector *connector) struct edid *edid; bool has_audio = false; - edid = drm_get_edid(connector, + edid = intel_drm_get_valid_edid(connector, &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter); if (edid) { if (edid->input & DRM_EDID_INPUT_DIGITAL) diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index d98cee6..b3a6eda 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -470,3 +470,45 @@ void intel_teardown_gmbus(struct drm_device *dev) kfree(dev_priv->gmbus); dev_priv->gmbus = NULL; } + +/** + * intel_drm_get_valid_edid - gets edid from existent adapters only + * @connector: DRM connector device to use + * @adapter: i2c adapter + * + * Verifies if the i2c adapter is responding to our queries before + * attempting to do proper communication with it. If it does, + * retreive the EDID with help of drm_get_edid + */ +struct edid * +intel_drm_get_valid_edid(struct drm_connector *connector, + struct i2c_adapter *adapter) +{ + int ret; + u8 out_buf[] = { 0x0, 0x0}; + u8 buf[2]; + struct i2c_msg msgs[] = { + { + .addr = 0x50, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = 0x50, + .flags = I2C_M_RD, + .len = 1, + .buf = buf, + } + }; + + /* We just check for -ENXIO - drm_get_edid checks if the transfer + * works and manages the remaining parts of the EDID */ + ret = i2c_transfer(adapter, msgs, 2); + if (ret == -ENXIO) { + DRM_DEBUG_KMS("i915: adapter %s not responding: %d\n", + adapter->name, ret); + return NULL; + } + return drm_get_edid(connector, adapter); +} diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 31da77f..8f59a8e 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -921,7 +921,7 @@ bool intel_lvds_init(struct drm_device *dev) * Attempt to get the fixed panel mode from DDC. Assume that the * preferred mode is the right one. */ - intel_lvds->edid = drm_get_edid(connector, + intel_lvds->edid = intel_drm_get_valid_edid(connector, &dev_priv->gmbus[pin].adapter); if (intel_lvds->edid) { if (drm_add_edid_modes(connector, diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c index 3b26a3b..ae1a989 100644 --- a/drivers/gpu/drm/i915/intel_modes.c +++ b/drivers/gpu/drm/i915/intel_modes.c @@ -31,33 +31,6 @@ #include "i915_drv.h" /** - * intel_ddc_probe - * - */ -bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus) -{ - struct drm_i915_private *dev_priv = intel_encoder->base.dev->dev_private; - u8 out_buf[] = { 0x0, 0x0}; - u8 buf[2]; - struct i2c_msg msgs[] = { - { - .addr = 0x50, - .flags = 0, - .len = 1, - .buf = out_buf, - }, - { - .addr = 0x50, - .flags = I2C_M_RD, - .len = 1, - .buf = buf, - } - }; - - return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 2) == 2; -} - -/** * intel_ddc_get_modes - get modelist from monitor * @connector: DRM connector device to use * @adapter: i2c adapter @@ -70,7 +43,7 @@ int intel_ddc_get_modes(struct drm_connector *connector, struct edid *edid; int ret = 0; - edid = drm_get_edid(connector, adapter); + edid = intel_drm_get_valid_edid(connector, adapter); if (edid) { drm_mode_connector_update_edid_property(connector, edid); ret = drm_add_edid_modes(connector, edid); diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 6348c49..8b4ac61 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1240,7 +1240,7 @@ static struct edid * intel_sdvo_get_edid(struct drm_connector *connector) { struct intel_sdvo *sdvo = intel_attached_sdvo(connector); - return drm_get_edid(connector, &sdvo->ddc); + return intel_drm_get_valid_edid(connector, &sdvo->ddc); } /* Mac mini hack -- use the same DDC as the analog connector */ @@ -1249,7 +1249,7 @@ intel_sdvo_get_analog_edid(struct drm_connector *connector) { struct drm_i915_private *dev_priv = connector->dev->dev_private; - return drm_get_edid(connector, + return intel_drm_get_valid_edid(connector, &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter); } -- 1.7.7 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
