On 5 April 2016 at 04:06, Yakir Yang <ykk at rock-chips.com> wrote:
> Hi Daniel,
>
>
> On 03/31/2016 06:15 PM, Daniel Vetter wrote:
>>
>> On Mon, Feb 15, 2016 at 07:08:05PM +0800, Yakir Yang wrote:
>>>
>>> Hi all,
>>>
>>>    The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller
>>> share the same IP, so a lot of parts can be re-used. I split the common
>>> code into bridge directory, then rk3288 and exynos only need to keep
>>> some platform code. Cause I can't find the exact IP name of exynos dp
>>> controller, so I decide to name dp core driver with "analogix" which I
>>> find in rk3288 eDP TRM
>>>
>>> But there are still three light registers setting different between
>>> exynos and rk3288.
>>> 1. RK3288 have five special pll registers which not indicate in exynos
>>>     dp controller.
>>> 2. The address of DP_PHY_PD(dp phy power manager register) are different
>>>     between rk3288 and exynos.
>>> 3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp
>>> debug
>>>     register).
>>>
>>> Due to Mark Yao have introduced the ATOMIC support to Rockchip drm, so
>>> it's
>>> okay to use the ATOMIC helpers functions in connector_funcs. No need to
>>> splict
>>> the connector init to platform driver anymore, and this is the biggest
>>> change
>>> since version 11.
>>>
>>> This v14 didn't have lots of new changes which seems not the correct time
>>> to
>>> upgrade the version number, but I have changed ordering of patches
>>> (adding 2
>>> more, and removing 2 out). Especially to prevent confusing people, so I
>>> updated
>>> the whole series.
>>
>> So I'm jumping into this part way late, but just noticed (well Thierry
>> pointed this out to me) that the exynos dp driver reinvents all the dp and
>> dp-aux helpers we already. That's somewhat okish for a private driver (and
>> exynos has a reputation for that kind of stuff), but imo not ok for a
>> shared driver.
>>
>> Not saying this should block merging this patch, but it really needs to be
>> addressed. All the dp aux and edid read code in the current
>> exynos_dp_core/reg.c files needs to be replaced with dp helpers and the
>> core i2c edid reading code.
>>
>> Who's going to sign up to do this?
>
>
> Volunteer to that, after finish this thread, I would send new series to
> switch to take use of dp helper.

Hi Yakir,

do you have plans to do this work in the short term? If not, I can tackle it.

Regards,

Tomeu

> :-D
> - Yakir
>
>
>> -Daniel
>>
>>> Thanks,
>>> - Yakir
>>>
>>>
>>> Changes in v14:
>>> - Rebase the new changes in imx-dp driver
>>> - Split up this patch into 3 parts, make this easy to review (Heiko)
>>> - Remove the Rockchip DP PHY to an separate thread (Heiko)
>>>      https://patchwork.kernel.org/patch/8312701/
>>>
>>> Changes in v13:
>>> - Use .enable instead of preprare/commit in encoder_helper_funcs (Heiko)
>>> - Fix the missing parameters with drm_encoder_init() helper function.
>>> (Heiko)
>>>
>>> Changes in v12:
>>> - Move the connector init to analogix_dp driver, and using ATOMIC helper
>>> (Heiko)
>>> - Add the ack from Jingoo
>>> - Remove the enum link_rate_type struct, using the marcos in
>>> drm_dp_helper.h (Jingoo)
>>>
>>> Changes in v11:
>>> - Uses tabs to fix the indentation issues in analogix_dp_core.h (Heiko)
>>> - Rename the "analogix,need-force-hpd" to common 'force-hpd' (Rob)
>>> - Add the ack from Rob Herring
>>> - Revert parts of Gustavo Padovan's changes in commit:
>>>         drm/exynos: do not start enabling DP at bind() phase
>>>    Add dp phy poweron function in bind time.
>>> - Move the panel prepare from get_modes time to bind time, and move
>>>    the panel unprepare from bridge->disable to unbind time. (Heiko)
>>>
>>> Changes in v10:
>>> - Add the ack from Rob Herring
>>> - Correct the ROCKCHIP_ANALOGIX_DP indentation in Kconfig to tabs here
>>> (Heiko)
>>> - Add the ack from Rob Herring
>>> - Remove the surplus "plat_data" check. (Heiko)
>>> -       switch (dp->plat_data && dp->plat_data->dev_type) {
>>> +       switch (dp->plat_data->dev_type) {
>>>
>>> Changes in v9:
>>> - Document more details for 'ports' property.
>>>
>>> Changes in v8:
>>> - Correct the right document path of display-timing.txt (Heiko)
>>> - Correct the misspell of 'from' to 'frm'. (Heiko)
>>> - Modify the commit subject name. (Heiko)
>>>
>>> Changes in v7:
>>> - Back to use the of_property_read_bool() interfacs to provoid backward
>>>    compatibility of "hsync-active-high" "vsync-active-high" "interlaced"
>>>    to avoid -EOVERFLOW error (Krzysztof)
>>>
>>> Changes in v6:
>>> - Fix the Kconfig recursive dependency (Javier)
>>> - Fix Peach Pit hpd property name error:
>>> -       hpd-gpio = <&gpx2 6 0>;
>>> +       hpd-gpios = <&gpx2 6 0>;
>>>
>>> Changes in v5:
>>> - Correct the check condition of gpio_is_valid when driver try to get
>>>    the "hpd-gpios" DT propery. (Heiko)
>>> - Move the platform attach callback in the front of core driver bridge
>>>    attch function. Cause once platform failed at attach, core driver
>>> should
>>>    still failed, so no need to init connector before platform attached
>>> (Krzysztof)
>>> - Keep code style no changes with the previous exynos_dp_code.c in this
>>>    patch, and update commit message about the new export symbol
>>> (Krzysztof)
>>> - Gather the device type patch (v4 11/16) into this one. (Krzysztof)
>>> - leave out the connector registration to analogix platform driver.
>>> (Thierry)
>>> - Resequence this patch after analogix_dp driver have been split
>>>    from exynos_dp code, and rephrase reasonable commit message, and
>>>    remove some controversial style (Krzysztof)
>>>      -          analogix_dp_write_byte_to_dpcd(
>>>      -                          dp, DP_TEST_RESPONSE,
>>>      +          analogix_dp_write_byte_to_dpcd(dp,
>>>      +                          DP_TEST_RESPONSE,
>>>                                 DP_TEST_EDID_CHECKSUM_WRITE);
>>> - Switch video timing type to "u32", so driver could use
>>> "of_property_read_u32"
>>>    to get the backword timing values. Krzysztof suggest me that driver
>>> could use
>>>    the "of_property_read_bool" to get backword timing values, but that
>>> interfacs
>>>    would modify the original drm_display_mode timing directly (whether
>>> those
>>>    properties exists or not).
>>> - Correct the misspell in commit message. (Krzysztof)
>>> - Remove the empty line at the end of document, and correct the endpoint
>>>    numbers in the example DT node, and remove the regulator iomux setting
>>>    in driver code while using the pinctl in devicetree instead. (Heiko)
>>> - Add device type declared, cause the previous "platform device type
>>>    support (v4 11/16)" already merge into (v5 02/14).
>>> - Implement connector registration code. (Thierry)
>>> - Split binding doc's from driver changes. (Rob)
>>> - Add eDP hotplug pinctrl property. (Heiko)
>>>
>>> Changes in v4:
>>> - Update "analogix,hpd-gpios" to "hpd-gpios" DT propery. (Rob)
>>> - Rename "analogix_dp-exynos.c" file name to "exynos_dp.c" (Jingoo)
>>> - Create a separate folder for analogix code in bridge/ (Archit)
>>> - Update commit message more readable. (Jingoo)
>>> - Adjust the order from 05 to 04
>>> - Provide backword compatibility with samsung. (Krzysztof)
>>> - Split all DTS changes, and provide backward compatibility. Mark old
>>>    properties as deprecated but still support them. (Krzysztof)
>>> - Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob)
>>> - Deprecated some properties which could parsed from Edid/Mode/DPCD.
>>> (Thierry)
>>>      "analogix,color-space" & "analogix,color-depth"   &
>>>      "analogix,link-rate"   & "analogix,lane-count"    &
>>>      "analogix,ycbcr-coeff" & "analogix,dynamic-range" &
>>>      "vsync-active-high"    & "hsync-active-high"      & "interlaces"
>>> - Separate all DTS changes to a separate patch. (Krzysztof)
>>> - Remove some deprecated DT properties in rockchip dp document.
>>> - Seprate the link-rate and lane-count limit out with the device_type
>>>    flag. (Thierry)
>>> - Take Jingoo suggest, add commit messages.
>>> - Call drm_panel_prepare() in .get_modes function, ensure panel should
>>>    power on before driver try to read edid message.
>>>
>>> Changes in v3:
>>> - Move exynos's video_timing code to analogix_dp-exynos platform driver,
>>>    add get_modes method to struct analogix_dp_plat_data. (Thierry)
>>> - Rename some "samsung*" dts propery to "analogix*". (Heiko)
>>> - The link_rate and lane_count shouldn't config to the DT property value
>>>    directly, but we can take those as hardware limite. For example,
>>> RK3288
>>>    only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property
>>> would
>>>    like "link-rate = 0x0a" "lane-count = 4". (Thierry)
>>> - Dynamic parse video timing info from struct drm_display_mode and
>>>    struct drm_display_info. (Thierry)
>>> - Add devicetree binding documents. (Heiko)
>>> - Remove sync pol & colorimetry properies from the new analogix dp driver
>>>    devicetree binding. (Thierry)
>>> - Update the exist exynos dtsi file with the latest DP DT properies.
>>> - Leave "sclk_edp_24m" to rockchip dp phy driver which name to "24m",
>>>    and leave "sclk_edp" to analogix dp core driver which name to "dp",
>>>    and leave "pclk_edp" to rockchip dp platform driver which name to
>>>    "pclk". (Thierry & Heiko)
>>> - Add devicetree binding document. (Heiko)
>>> - Remove "rockchip,panel" DT property, take use of remote point to get
>>> panel
>>>    node. (Heiko)
>>> - Add the new function point dp_platdata->get_modes() init.
>>> - Add "analogix,need-force-hpd" to indicate whether driver need foce
>>>    hpd when hpd detect failed.
>>> - move dp hpd detect to connector detect function.
>>> - Add edid modes parse support
>>>
>>> Changes in v2:
>>> - Remove new copyright (Jingoo)
>>> - Fix compiled failed due to analogix_dp_device misspell
>>> - Improved commit message more readable, and avoid using some
>>>    uncommon style like bellow: (Joe Preches)
>>>      -  retval = exynos_dp_read_bytes_from_i2c(...
>>>                                   ...);
>>>      +  retval =
>>>      +  exynos_dp_read_bytes_from_i2c(......);
>>> - Get panel node with remote-endpoint method, and create devicetree
>>> binding
>>>    for driver. (Heiko)
>>> - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
>>>    leave those clock to rockchip dp phy driver.
>>> - Fix compile failed dut to phy_pd_addr variable misspell error
>>>
>>> Heiko Stuebner (2):
>>>    drm/exynos: dp: rename implementation specific driver part
>>>    drm: bridge: analogix/dp: rename register constants
>>>
>>> Yakir Yang (15):
>>>    drm: bridge: analogix/dp: split exynos dp driver to bridge directory
>>>    drm: bridge: analogix/dp: fix some obvious code style
>>>    drm: bridge: analogix/dp: remove duplicate configuration of link rate
>>>      and link count
>>>    drm: bridge: analogix/dp: dynamic parse sync_pol & interlace &
>>>      dynamic_range
>>>    dt-bindings: add document for analogix display port driver
>>>    ARM: dts: exynos/dp: remove some properties that deprecated by
>>>      analogix_dp driver
>>>    drm: rockchip: dp: add rockchip platform dp driver
>>>    dt-bindings: add document for rockchip variant of analogix_dp
>>>    drm: bridge: analogix/dp: add some rk3288 special registers setting
>>>    drm: bridge: analogix/dp: add max link rate and lane count limit for
>>>      RK3288
>>>    drm: bridge: analogix/dp: try force hpd after plug in lookup failed
>>>    drm: bridge: analogix/dp: move hpd detect to connector detect function
>>>    drm: bridge: analogix/dp: add edid modes parse in get_modes method
>>>    drm: bridge: analogix/dp: add panel prepare/unprepare in
>>>      suspend/resume time
>>>    drm: bridge: analogix/dp: Fix the possible dead lock in bridge disable
>>>      time
>>>
>>>   .../bindings/display/bridge/analogix_dp.txt        |   52 +
>>>   .../bindings/display/exynos/exynos_dp.txt          |   93 +-
>>>   .../display/rockchip/analogix_dp-rockchip.txt      |   92 ++
>>>   arch/arm/boot/dts/exynos5250-arndale.dts           |    2 -
>>>   arch/arm/boot/dts/exynos5250-smdk5250.dts          |    2 -
>>>   arch/arm/boot/dts/exynos5250-snow-common.dtsi      |    4 +-
>>>   arch/arm/boot/dts/exynos5250-spring.dts            |    4 +-
>>>   arch/arm/boot/dts/exynos5420-peach-pit.dts         |    4 +-
>>>   arch/arm/boot/dts/exynos5420-smdk5420.dts          |    2 -
>>>   arch/arm/boot/dts/exynos5800-peach-pi.dts          |    2 -
>>>   drivers/gpu/drm/bridge/Kconfig                     |    2 +
>>>   drivers/gpu/drm/bridge/Makefile                    |    1 +
>>>   drivers/gpu/drm/bridge/analogix/Kconfig            |    3 +
>>>   drivers/gpu/drm/bridge/analogix/Makefile           |    1 +
>>>   drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 1430
>>> ++++++++++++++++++
>>>   drivers/gpu/drm/bridge/analogix/analogix_dp_core.h |  281 ++++
>>>   drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c  | 1320
>>> +++++++++++++++++
>>>   .../analogix/analogix_dp_reg.h}                    |  270 ++--
>>>   drivers/gpu/drm/exynos/Kconfig                     |    3 +-
>>>   drivers/gpu/drm/exynos/Makefile                    |    2 +-
>>>   drivers/gpu/drm/exynos/exynos_dp.c                 |  324 +++++
>>>   drivers/gpu/drm/exynos/exynos_dp_core.c            | 1510
>>> --------------------
>>>   drivers/gpu/drm/exynos/exynos_dp_core.h            |  282 ----
>>>   drivers/gpu/drm/exynos/exynos_dp_reg.c             | 1263
>>> ----------------
>>>   drivers/gpu/drm/rockchip/Kconfig                   |    9 +
>>>   drivers/gpu/drm/rockchip/Makefile                  |    1 +
>>>   drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    |  384 +++++
>>>   include/drm/bridge/analogix_dp.h                   |   41 +
>>>   28 files changed, 4115 insertions(+), 3269 deletions(-)
>>>   create mode 100644
>>> Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
>>>   create mode 100644
>>> Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
>>>   create mode 100644 drivers/gpu/drm/bridge/analogix/Kconfig
>>>   create mode 100644 drivers/gpu/drm/bridge/analogix/Makefile
>>>   create mode 100644 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>>>   create mode 100644 drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
>>>   create mode 100644 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
>>>   rename drivers/gpu/drm/{exynos/exynos_dp_reg.h =>
>>> bridge/analogix/analogix_dp_reg.h} (62%)
>>>   create mode 100644 drivers/gpu/drm/exynos/exynos_dp.c
>>>   delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.c
>>>   delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.h
>>>   delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_reg.c
>>>   create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>>   create mode 100644 include/drm/bridge/analogix_dp.h
>>>
>>> --
>>> 1.9.1
>>>
>>>
>>> _______________________________________________
>>> dri-devel mailing list
>>> dri-devel at lists.freedesktop.org
>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to