This patch adds drm_bridge driver for parade DSI to eDP bridge chip. Signed-off-by: Jitao Shi <jitao.shi at mediatek.com> --- Changes since v11: - Remove depends on I2C, add DRM depends - Reuse ps8640_write_bytes() in ps8640_write_byte() - Use timer check for polling like the routines in <linux/iopoll.h> - Fix no drm_connector_unregister/drm_connector_cleanup when ps8640_bridge_attach fail - Check the ps8640 hardware id in ps8640_validate_firmware - Remove fw_version check - Move ps8640_validate_firmware before ps8640_enter_bl - Add ddc_i2c unregister when probe fail and ps8640_remove
The following patches are needed to support dsi host through none dsi bus: https://patchwork.kernel.org/patch/8289181/ ("drm/dsi: check for CONFIG_OF when defining") https://patchwork.kernel.org/patch/8289051/ ("drm/dsi: Use mipi_dsi_device_register_full for DSI device") https://patchwork.kernel.org/patch/8289081/ ("drm/dsi: Try to match non-DT DSI devices") https://patchwork.kernel.org/patch/8289121/ ("drm/dsi: Add routine to unregister a DSI device") https://patchwork.kernel.org/patch/8289091/ ("drm/dsi: Get DSI host by DT device node") --- drivers/gpu/drm/bridge/Kconfig | 12 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/parade-ps8640.c | 1073 ++++++++++++++++++++++++++++++++ 3 files changed, 1086 insertions(+) create mode 100644 drivers/gpu/drm/bridge/parade-ps8640.c diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 27e2022..be6084e 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -40,4 +40,16 @@ config DRM_PARADE_PS8622 ---help--- Parade eDP-LVDS bridge chip driver. +config DRM_PARADE_PS8640 + tristate "Parade PS8640 MIPI DSI to eDP Converter" + depends on DRM + depends on OF + select DRM_KMS_HELPER + select DRM_MIPI_DSI + select DRM_PANEL + ---help--- + Choose this option if you have PS8640 for display + The PS8640 is a high-performance and low-power + MIPI DSI to eDP converter + endmenu diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index f13c33d..fbe38dc 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o +obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c new file mode 100644 index 0000000..d7700e2 --- /dev/null +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -0,0 +1,1073 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/firmware.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/of_graph.h> +#include <linux/regulator/consumer.h> +#include <asm/unaligned.h> +#include <drm/drm_panel.h> + +#include <drmP.h> +#include <drm_atomic_helper.h> +#include <drm_crtc_helper.h> +#include <drm_crtc.h> +#include <drm_edid.h> +#include <drm_mipi_dsi.h> + +#define PAGE2_SPI_CFG3 0x82 +#define I2C_TO_SPI_RESET 0x20 +#define PAGE2_ROMADD_BYTE1 0x8e +#define PAGE2_ROMADD_BYTE2 0x8f +#define PAGE2_SWSPI_WDATA 0x90 +#define PAGE2_SWSPI_RDATA 0x91 +#define PAGE2_SWSPI_LEN 0x92 +#define PAGE2_SWSPI_CTL 0x93 +#define TRIGGER_NO_READBACK 0x05 +#define TRIGGER_READBACK 0x01 +#define PAGE2_SPI_STATUS 0x9e +#define PAGE2_GPIO_L 0xa6 +#define PAGE2_GPIO_H 0xa7 +#define PS_GPIO9 BIT(1) +#define PAGE2_IROM_CTRL 0xb0 +#define IROM_ENABLE 0xc0 +#define IROM_DISABLE 0x80 +#define PAGE2_SW_REST 0xbc +#define SPI_SW_RESET BIT(7) +#define MPU_SW_RESET BIT(6) +#define PAGE2_ENCTLSPI_WR 0xda +#define PAGE2_I2C_BYPASS 0xea +#define I2C_BYPASS_EN 0xd0 +#define PAGE3_SET_ADD 0xfe +#define PAGE3_SET_VAL 0xff +#define VDO_CTL_ADD 0x13 +#define VDO_DIS 0x18 +#define VDO_EN 0x1c +#define PAGE4_REV_L 0xf0 +#define PAGE4_REV_H 0xf1 +#define PAGE4_CHIP_L 0xf2 +#define PAGE4_CHIP_H 0xf3 + +/* Firmware */ +#define SPI_MAX_RETRY_CNT 8 +#define PS_FW_NAME "ps864x_fw.bin" + +#define FW_CHIP_ID_OFFSET 0 +#define FW_VERSION_OFFSET 2 +#define EDID_I2C_ADDR 0x50 + +#define WRITE_STATUS_REG_CMD 0x01 +#define READ_STATUS_REG_CMD 0x05 +#define BUSY BIT(0) +#define CLEAR_ALL_PROTECT 0x00 +#define BLK_PROTECT_BITS 0x0c +#define STATUS_REG_PROTECT BIT(7) +#define WRITE_ENABLE_CMD 0x06 +#define CHIP_ERASE_CMD 0xc7 + +#define bridge_to_ps8640(e) container_of(e, struct ps8640, bridge) +#define connector_to_ps8640(e) container_of(e, struct ps8640, connector) + +struct ps8640_info { + u8 family_id; + u8 variant_id; + u16 version; +}; + +struct ps8640 { + struct drm_connector connector; + struct drm_bridge bridge; + struct edid *edid; + struct mipi_dsi_device dsi; + struct i2c_client *page[8]; + struct i2c_client *ddc_i2c; + struct regulator_bulk_data supplies[2]; + struct drm_panel *panel; + struct gpio_desc *gpio_rst_n; + struct gpio_desc *gpio_slp_n; + struct gpio_desc *gpio_mode_sel_n; + bool enabled; + + /* firmware file info */ + bool in_fw_update; + struct ps8640_info info; +}; + +static const u8 enc_ctrl_code[6] = {0xaa, 0x55, 0x50, 0x41, 0x52, 0x44}; +static const u8 hw_chip_id = {0x00, 0x0a, 0x00, 0x30}; + +static int ps8640_read(struct i2c_client *client, u8 reg, u8 *data, + u16 data_len) +{ + int ret; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = ®, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = data_len, + .buf = data, + } + }; + + ret = i2c_transfer(client->adapter, msgs, 2); + + if (ret == 2) + return 0; + if (ret < 0) + return ret; + else + return -EIO; +} + +static int ps8640_write_bytes(struct i2c_client *client, u8 *data, + u16 data_len) +{ + int ret; + struct i2c_msg msg; + + msg.addr = client->addr; + msg.flags = 0; + msg.len = data_len; + msg.buf = data; + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret == 1) + return 0; + if (ret < 0) + return ret; + else + return -EIO; +} + +static int ps8640_write_byte(struct i2c_client *client, u8 reg, u8 data) +{ + u8 buf[] = {reg, data}; + + return ps8640_write_bytes(client, buf, sizeof(buf)); +} + +static void ps8640_get_mcu_fw_version(struct ps8640 *ps_bridge) +{ + struct i2c_client *client = ps_bridge->page[5]; + u8 fw_ver[2]; + + ps8640_read(client, 0x4, fw_ver, 2); + ps_bridge->info.version = (fw_ver[0] << 8) | fw_ver[1]; + + DRM_INFO_ONCE("ps8640 rom fw version %d.%d\n", fw_ver[0], fw_ver[1]); +} + +static int ps8640_bridge_enable(struct ps8640 *ps_bridge) +{ + struct i2c_client *client = ps_bridge->page[3]; + u8 vdo_ctrl_buf[3] = {PAGE3_SET_ADD, VDO_CTL_ADD, VDO_EN}; + + return ps8640_write_bytes(client, vdo_ctrl_buf, 3); +} + +static int ps8640_bridge_disable(struct ps8640 *ps_bridge) +{ + struct i2c_client *client = ps_bridge->page[3]; + u8 vdo_ctrl_buf[3] = {PAGE3_SET_ADD, VDO_CTL_ADD, VDO_DIS}; + + return ps8640_write_bytes(client, vdo_ctrl_buf, 3); +} + +static void ps8640_pre_enable(struct drm_bridge *bridge) +{ + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); + struct i2c_client *client = ps_bridge->page[2]; + int err; + u8 set_vdo_done; + ktime_t timeout; + + if (ps_bridge->in_fw_update) + return; + + if (ps_bridge->enabled) + return; + + err = drm_panel_prepare(ps_bridge->panel); + if (err < 0) { + DRM_ERROR("failed to prepare panel: %d\n", err); + return; + } + + err = regulator_bulk_enable(ARRAY_SIZE(ps_bridge->supplies), + ps_bridge->supplies); + if (err < 0) { + DRM_ERROR("cannot enable regulators %d\n", err); + goto err_panel_unprepare; + } + + gpiod_set_value(ps_bridge->gpio_slp_n, 1); + gpiod_set_value(ps_bridge->gpio_rst_n, 0); + usleep_range(2000, 2500); + gpiod_set_value(ps_bridge->gpio_rst_n, 1); + + /* + * Wait for the ps8640 embed mcu ready + * First wait 200ms and then check the mcu ready flag every 20ms + */ + msleep(200); + + timeout = ktime_add_ms(ktime_get(), 200); + for (;;) { + err = ps8640_read(client, PAGE2_GPIO_H, &set_vdo_done, 1); + if (err < 0) { + DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", err); + goto err_regulators_disable; + } + if ((set_vdo_done & PS_GPIO9) == PS_GPIO9) + break; + if (ktime_compare(ktime_get(), timeout) > 0) + break; + msleep(20); + } + + if (ps_bridge->info.version == 0) + ps8640_get_mcu_fw_version(ps_bridge); + /* Switch access edp panel's edid through i2c */ + ps8640_write_byte(client, PAGE2_I2C_BYPASS, I2C_BYPASS_EN); + ps_bridge->enabled = true; + + return; + +err_regulators_disable: + regulator_bulk_disable(ARRAY_SIZE(ps_bridge->supplies), + ps_bridge->supplies); +err_panel_unprepare: + drm_panel_unprepare(ps_bridge->panel); +} + +static void ps8640_enable(struct drm_bridge *bridge) +{ + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); + int err; + + err = ps8640_bridge_enable(ps_bridge); + if (err) + DRM_ERROR("failed to enable unmutevideo: %d\n", err); + + err = drm_panel_enable(ps_bridge->panel); + if (err < 0) + DRM_ERROR("failed to enable panel: %d\n", err); +} + +static void ps8640_disable(struct drm_bridge *bridge) +{ + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); + int err; + + err = drm_panel_disable(ps_bridge->panel); + if (err < 0) + DRM_ERROR("failed to disable panel: %d\n", err); + + err = ps8640_bridge_disable(ps_bridge); + if (err < 0) + DRM_ERROR("failed to disable bridge: %d\n", err); +} + +static void ps8640_post_disable(struct drm_bridge *bridge) +{ + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); + int err; + + if (ps_bridge->in_fw_update) + return; + + if (!ps_bridge->enabled) + return; + + ps_bridge->enabled = false; + + gpiod_set_value(ps_bridge->gpio_rst_n, 0); + gpiod_set_value(ps_bridge->gpio_slp_n, 0); + err = regulator_bulk_disable(ARRAY_SIZE(ps_bridge->supplies), + ps_bridge->supplies); + if (err < 0) + DRM_ERROR("cannot disable regulators %d\n", err); + + err = drm_panel_unprepare(ps_bridge->panel); + if (err) + DRM_ERROR("failed to unprepare panel: %d\n", err); +} + +static int ps8640_get_modes(struct drm_connector *connector) +{ + struct ps8640 *ps_bridge = connector_to_ps8640(connector); + struct device *dev = &ps_bridge->page[0]->dev; + u8 *edid; + int ret, num_modes = 0; + bool power_off; + + if (ps_bridge->edid) + return drm_add_edid_modes(connector, ps_bridge->edid); + + power_off = !ps_bridge->enabled; + ps8640_pre_enable(&ps_bridge->bridge); + + edid = devm_kmalloc(dev, EDID_LENGTH, GFP_KERNEL); + if (!edid) { + DRM_ERROR("Failed to allocate EDID\n"); + return 0; + } + + ret = ps8640_read(ps_bridge->ddc_i2c, 0, edid, EDID_LENGTH); + if (ret) + goto out; + + ps_bridge->edid = (struct edid *)edid; + drm_mode_connector_update_edid_property(connector, ps_bridge->edid); + + num_modes = drm_add_edid_modes(connector, ps_bridge->edid); + +out: + if (power_off) + ps8640_post_disable(&ps_bridge->bridge); + + return num_modes; +} + +static struct drm_encoder *ps8640_best_encoder(struct drm_connector *connector) +{ + struct ps8640 *ps_bridge = connector_to_ps8640(connector); + + return ps_bridge->bridge.encoder; +} + +static const struct drm_connector_helper_funcs ps8640_connector_helper_funcs = { + .get_modes = ps8640_get_modes, + .best_encoder = ps8640_best_encoder, +}; + +static enum drm_connector_status ps8640_detect(struct drm_connector *connector, + bool force) +{ + return connector_status_connected; +} + +static void ps8640_connector_destroy(struct drm_connector *connector) +{ + drm_connector_unregister(connector); + drm_connector_cleanup(connector); +} + +static const struct drm_connector_funcs ps8640_connector_funcs = { + .dpms = drm_atomic_helper_connector_dpms, + .fill_modes = drm_helper_probe_single_connector_modes, + .detect = ps8640_detect, + .destroy = ps8640_connector_destroy, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +int ps8640_bridge_attach(struct drm_bridge *bridge) +{ + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); + struct device *dev = &ps_bridge->page[0]->dev; + struct device_node *np = dev->of_node; + struct device_node *port, *in_ep; + struct device_node *dsi_node = NULL; + struct mipi_dsi_host *host = ps_bridge->dsi.host; + int ret; + + ret = drm_connector_init(bridge->dev, &ps_bridge->connector, + &ps8640_connector_funcs, + DRM_MODE_CONNECTOR_eDP); + + if (ret) { + DRM_ERROR("Failed to initialize connector with drm: %d\n", ret); + return ret; + } + + drm_connector_helper_add(&ps_bridge->connector, + &ps8640_connector_helper_funcs); + drm_connector_register(&ps_bridge->connector); + + ps_bridge->connector.dpms = DRM_MODE_DPMS_ON; + drm_mode_connector_attach_encoder(&ps_bridge->connector, + bridge->encoder); + + if (ps_bridge->panel) + drm_panel_attach(ps_bridge->panel, &ps_bridge->connector); + + /* port at 0 is ps8640 dsi input port */ + port = of_graph_get_port_by_id(np, 0); + if (port) { + in_ep = of_get_child_by_name(port, "endpoint"); + of_node_put(port); + if (in_ep) { + dsi_node = of_graph_get_remote_port_parent(in_ep); + of_node_put(in_ep); + } + } + if (dsi_node) { + host = of_find_mipi_dsi_host_by_node(dsi_node); + of_node_put(dsi_node); + if (!host) { + ret = -ENODEV; + goto err; + } + } + + ps_bridge->dsi.host = host; + ps_bridge->dsi.mode_flags = MIPI_DSI_MODE_VIDEO | + MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + ps_bridge->dsi.format = MIPI_DSI_FMT_RGB888; + ps_bridge->dsi.lanes = 4; + ret = mipi_dsi_attach(&ps_bridge->dsi); + if (ret) + goto err; + + return 0; +err: + if (ps_bridge->panel) + drm_panel_detach(ps_bridge->panel); + drm_connector_unregister(&ps_bridge->connector); + drm_connector_cleanup(&ps_bridge->connector); + return ret; +} + +static const struct drm_bridge_funcs ps8640_bridge_funcs = { + .attach = ps8640_bridge_attach, + .disable = ps8640_disable, + .post_disable = ps8640_post_disable, + .pre_enable = ps8640_pre_enable, + .enable = ps8640_enable, +}; + +/* Firmware Version is returned as Major.Minor.Build */ +static ssize_t ps8640_fw_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ps8640 *ps_bridge = dev_get_drvdata(dev); + struct ps8640_info *info = &ps_bridge->info; + + return scnprintf(buf, PAGE_SIZE, "%u.%u\n", info->version >> 8, + info->version & 0xff); +} + +/* Hardware Version is returned as FamilyID.VariantID */ +static ssize_t ps8640_hw_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ps8640 *ps_bridge = dev_get_drvdata(dev); + struct ps8640_info *info = &ps_bridge->info; + + return scnprintf(buf, PAGE_SIZE, "ps%u.%u\n", info->family_id, + info->variant_id); +} + +static int ps8640_spi_send_cmd(struct ps8640 *ps_bridge, u8 *cmd, u8 cmd_len) +{ + struct i2c_client *client = ps_bridge->page[2]; + u8 i, buf[3]; + int ret; + + ret = ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_ENABLE); + if (ret) + goto err; + + /* write command in write port */ + for (i = 0; i < cmd_len; i++) { + ret = ps8640_write_byte(client, PAGE2_SWSPI_WDATA, cmd[i]); + if (ret) { + ps8640_write_byte(client, PAGE2_IROM_CTRL, + IROM_DISABLE); + goto err; + } + } + + buf[0] = PAGE2_SWSPI_LEN; + buf[1] = cmd_len - 1; + buf[2] = TRIGGER_NO_READBACK; + ret = ps8640_write_bytes(client, buf, 3); + if (ret) { + ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE); + goto err; + } + + ret = ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE); + if (ret) + goto err; + + return 0; + +err: + dev_err(&client->dev, "send command err: %d\n", ret); + return ret; +} + +static int ps8640_wait_spi_ready(struct ps8640 *ps_bridge) +{ + struct i2c_client *client = ps_bridge->page[2]; + u8 spi_rdy_st; + ktime_t timeout; + + timeout = ktime_add_ms(ktime_get(), 200); + for (;;) { + ps8640_read(client, PAGE2_SPI_STATUS, &spi_rdy_st, 1); + if ((spi_rdy_st & 0x0c) != 0x0c) + break; + + if (ktime_compare(ktime_get(), timeout) > 0) { + dev_err(&client->dev, "wait spi ready timeout\n"); + return -EBUSY; + } + + msleep(20); + } + + return 0; +} + +static int ps8640_wait_spi_nobusy(struct ps8640 *ps_bridge) +{ + struct i2c_client *client = ps_bridge->page[2]; + u8 spi_status, buf[3]; + int ret; + ktime_t timeout; + + timeout = ktime_add_ms(ktime_get(), 500); + for (;;) { + /* 0x05 RDSR; Read-Status-Register */ + ret = ps8640_write_byte(client, PAGE2_SWSPI_WDATA, + READ_STATUS_REG_CMD); + if (ret) + goto err_send_cmd_exit; + + buf[0] = PAGE2_SWSPI_LEN; + buf[1] = 0; + buf[2] = TRIGGER_READBACK; + ret = ps8640_write_bytes(client, buf, 3); + if (ret) + goto err_send_cmd_exit; + + /* delay for cmd send */ + usleep_range(300, 500); + /* wait for SPI ROM until not busy */ + ret = ps8640_read(client, PAGE2_SWSPI_RDATA, &spi_status, 1); + if (ret) + goto err_send_cmd_exit; + + if (!(spi_status & BUSY)) + break; + + if (ktime_compare(ktime_get(), timeout) > 0) { + dev_err(&client->dev, "wait spi no busy timeout: %d\n", + ret); + return -EBUSY; + } + } + + return 0; + +err_send_cmd_exit: + dev_err(&client->dev, "send command err: %d\n", ret); + return ret; +} + +static int ps8640_wait_rom_idle(struct ps8640 *ps_bridge) +{ + struct i2c_client *client = ps_bridge->page[0]; + int ret; + + ret = ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_ENABLE); + if (ret) + goto exit; + + ret = ps8640_wait_spi_ready(ps_bridge); + if (ret) + goto err_spi; + + ret = ps8640_wait_spi_nobusy(ps_bridge); + if (ret) + goto err_spi; + + ret = ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE); + if (ret) + goto exit; + + return 0; + +err_spi: + ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE); +exit: + if (ret) + dev_err(&client->dev, "wait ps8640 rom idle fail: %d\n", ret); + + return ret; +} + +static int ps8640_spi_dl_mode(struct ps8640 *ps_bridge) +{ + struct i2c_client *client = ps_bridge->page[2]; + int ret; + + /* switch ps8640 mode to spi dl mode */ + gpiod_set_value(ps_bridge->gpio_mode_sel_n, 0); + + /* reset spi interface */ + ret = ps8640_write_byte(client, PAGE2_SW_REST, + SPI_SW_RESET | MPU_SW_RESET); + if (ret) + goto exit; + + ret = ps8640_write_byte(client, PAGE2_SW_REST, MPU_SW_RESET); + if (ret) + goto exit; + +exit: + if (ret) + dev_err(&client->dev, "fail reset spi interface: %d\n", ret); + + return ret; +} + +static int ps8640_rom_prepare(struct ps8640 *ps_bridge) +{ + struct i2c_client *client = ps_bridge->page[2]; + struct device *dev = &client->dev; + u8 i, cmd[2]; + int ret; + + cmd[0] = WRITE_ENABLE_CMD; + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 1); + if (ret) { + dev_err(dev, "failed enable-write-status-register: %d\n", ret); + return ret; + } + + cmd[0] = WRITE_STATUS_REG_CMD; + cmd[1] = CLEAR_ALL_PROTECT; + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 2); + if (ret) { + dev_err(dev, "fail disable all protection: %d\n", ret); + return ret; + } + + /* wait for SPI module ready */ + ret = ps8640_wait_rom_idle(ps_bridge); + if (ret) { + dev_err(dev, "fail wait rom idle: %d\n", ret); + return ret; + } + + ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_ENABLE); + for (i = 0; i < 6; i++) + ps8640_write_byte(client, PAGE2_ENCTLSPI_WR, enc_ctrl_code[i]); + ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE); + + /* Enable-Write-Status-Register */ + cmd[0] = WRITE_ENABLE_CMD; + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 1); + if (ret) { + dev_err(dev, "fail enable-write-status-register: %d\n", ret); + return ret; + } + + /* chip erase command */ + cmd[0] = CHIP_ERASE_CMD; + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 1); + if (ret) { + dev_err(dev, "fail disable all protection: %d\n", ret); + return ret; + } + + ret = ps8640_wait_rom_idle(ps_bridge); + if (ret) { + dev_err(dev, "fail wait rom idle: %d\n", ret); + return ret; + } + + return 0; +} + +static int ps8640_check_chip_id(struct ps8640 *ps_bridge) +{ + struct i2c_client *client = ps_bridge->page[4]; + u8 buf[4]; + + ps8640_read(client, PAGE4_REV_L, buf, 4); + return memcmp(buf, hw_chip_id, sizeof(buf)); +} + +static int ps8640_validate_firmware(struct ps8640 *ps_bridge, + const struct firmware *fw) +{ + struct i2c_client *client = ps_bridge->page[0]; + u16 fw_chip_id; + + /* + * Get the chip_id from the firmware. Make sure that it is the + * right controller to do the firmware and config update. + */ + fw_chip_id = get_unaligned_le16(fw->data + FW_CHIP_ID_OFFSET); + + if (fw_chip_id != 0x8640 && ps8640_check_chip_id(ps_bridge) == 0) { + dev_err(&client->dev, + "chip id mismatch: fw 0x%x vs. chip 0x8640\n", + fw_chip_id); + return -EINVAL; + } + + return 0; +} + +static int ps8640_write_rom(struct ps8640 *ps_bridge, const struct firmware *fw) +{ + struct i2c_client *client = ps_bridge->page[0]; + struct device *dev = &client->dev; + struct i2c_client *client2 = ps_bridge->page[2]; + struct i2c_client *client7 = ps_bridge->page[7]; + unsigned int pos = 0; + u8 buf[257], rom_page_id_buf[3]; + int ret; + u16 cpy_len; + + ps8640_write_byte(client2, PAGE2_SPI_CFG3, I2C_TO_SPI_RESET); + msleep(100); + ps8640_write_byte(client2, PAGE2_SPI_CFG3, 0x00); + + for (pos = 0; pos < fw->size; pos += cpy_len) { + rom_page_id_buf[0] = PAGE2_ROMADD_BYTE1; + rom_page_id_buf[1] = pos >> 8; + rom_page_id_buf[2] = pos >> 16; + ret = ps8640_write_bytes(client2, rom_page_id_buf, 3); + if (ret) + goto error; + cpy_len = fw->size >= 256 + pos ? 256 : fw->size - pos; + buf[0] = 0; + memcpy(buf + 1, fw->data + pos, cpy_len); + ret = ps8640_write_bytes(client7, buf, cpy_len + 1); + if (ret) + goto error; + + dev_dbg(dev, "fw update completed %u / %zu bytes\n", pos, + fw->size); + } + return 0; + +error: + dev_err(dev, "failed write extenal flash, %d\n", ret); + return ret; +} + +static int ps8640_spi_normal_mode(struct ps8640 *ps_bridge) +{ + u8 cmd[2]; + struct i2c_client *client = ps_bridge->page[2]; + + /* Enable-Write-Status-Register */ + cmd[0] = WRITE_ENABLE_CMD; + ps8640_spi_send_cmd(ps_bridge, cmd, 1); + + /* protect BPL/BP0/BP1 */ + cmd[0] = WRITE_STATUS_REG_CMD; + cmd[1] = BLK_PROTECT_BITS | STATUS_REG_PROTECT; + ps8640_spi_send_cmd(ps_bridge, cmd, 2); + + /* wait for SPI rom ready */ + ps8640_wait_rom_idle(ps_bridge); + + /* disable PS8640 mapping function */ + ps8640_write_byte(client, PAGE2_ENCTLSPI_WR, 0x00); + + gpiod_set_value(ps_bridge->gpio_mode_sel_n, 1); + return 0; +} + +static int ps8640_enter_bl(struct ps8640 *ps_bridge) +{ + ps_bridge->in_fw_update = true; + return ps8640_spi_dl_mode(ps_bridge); +} + +static void ps8640_exit_bl(struct ps8640 *ps_bridge, const struct firmware *fw) +{ + ps8640_spi_normal_mode(ps_bridge); + ps_bridge->in_fw_update = false; +} + +static int ps8640_load_fw(struct ps8640 *ps_bridge, const struct firmware *fw) +{ + struct i2c_client *client = ps_bridge->page[0]; + struct device *dev = &client->dev; + int ret; + bool ps8640_status_backup = ps_bridge->enabled; + + ret = ps8640_validate_firmware(ps_bridge, fw); + if (ret) + return ret; + + if (!ps_bridge->in_fw_update) { + if (!ps8640_status_backup) + ps8640_pre_enable(&ps_bridge->bridge); + + ret = ps8640_enter_bl(ps_bridge); + if (ret) + goto exit; + } + + ret = ps8640_rom_prepare(ps_bridge); + if (ret) + goto exit; + + ret = ps8640_write_rom(ps_bridge, fw); + +exit: + if (ret) + dev_err(dev, "Failed to load firmware, %d\n", ret); + + ps8640_exit_bl(ps_bridge, fw); + if (!ps8640_status_backup) + ps8640_post_disable(&ps_bridge->bridge); + return ret; +} + +static ssize_t ps8640_update_fw_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ps8640 *ps_bridge = i2c_get_clientdata(client); + const struct firmware *fw; + int error; + + error = request_firmware(&fw, PS_FW_NAME, dev); + if (error) { + dev_err(dev, "Unable to open firmware %s: %d\n", + PS_FW_NAME, error); + return error; + } + + error = ps8640_load_fw(ps_bridge, fw); + if (error) + dev_err(dev, "The firmware update failed(%d)\n", error); + else + dev_info(dev, "The firmware update succeeded\n"); + + release_firmware(fw); + return error ? error : count; +} + +static DEVICE_ATTR(fw_version, S_IRUGO, ps8640_fw_version_show, NULL); +static DEVICE_ATTR(hw_version, S_IRUGO, ps8640_hw_version_show, NULL); +static DEVICE_ATTR(update_fw, S_IWUSR, NULL, ps8640_update_fw_store); + +static struct attribute *ps8640_attrs[] = { + &dev_attr_fw_version.attr, + &dev_attr_hw_version.attr, + &dev_attr_update_fw.attr, + NULL +}; + +static const struct attribute_group ps8640_attr_group = { + .attrs = ps8640_attrs, +}; + +static void ps8640_remove_sysfs_group(void *data) +{ + struct ps8640 *ps_bridge = data; + + sysfs_remove_group(&ps_bridge->page[0]->dev.kobj, &ps8640_attr_group); +} + +static int ps8640_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct ps8640 *ps_bridge; + struct device_node *np = dev->of_node; + struct device_node *port, *out_ep; + struct device_node *panel_node = NULL; + int i, ret; + + ps_bridge = devm_kzalloc(dev, sizeof(*ps_bridge), GFP_KERNEL); + if (!ps_bridge) + return -ENOMEM; + + /* port at 1 is ps8640 output port */ + port = of_graph_get_port_by_id(np, 1); + if (port) { + out_ep = of_get_child_by_name(port, "endpoint"); + of_node_put(port); + if (out_ep) { + panel_node = of_graph_get_remote_port_parent(out_ep); + of_node_put(out_ep); + } + } + if (panel_node) { + ps_bridge->panel = of_drm_find_panel(panel_node); + of_node_put(panel_node); + if (!ps_bridge->panel) + return -EPROBE_DEFER; + } + + ps_bridge->supplies[0].supply = "vdd33"; + ps_bridge->supplies[1].supply = "vdd12"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ps_bridge->supplies), + ps_bridge->supplies); + if (ret) { + dev_info(dev, "failed to get regulators: %d\n", ret); + return ret; + } + + ps_bridge->gpio_mode_sel_n = devm_gpiod_get(&client->dev, "mode-sel", + GPIOD_OUT_HIGH); + if (IS_ERR(ps_bridge->gpio_mode_sel_n)) { + ret = PTR_ERR(ps_bridge->gpio_mode_sel_n); + dev_err(dev, "cannot get mode-sel %d\n", ret); + return ret; + } + + ps_bridge->gpio_slp_n = devm_gpiod_get(&client->dev, "sleep", + GPIOD_OUT_LOW); + if (IS_ERR(ps_bridge->gpio_slp_n)) { + ret = PTR_ERR(ps_bridge->gpio_slp_n); + dev_err(dev, "cannot get sleep: %d\n", ret); + return ret; + } + + /* + * Request the reset pin low to avoid the bridge being + * initialized prematurely + */ + ps_bridge->gpio_rst_n = devm_gpiod_get(&client->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(ps_bridge->gpio_rst_n)) { + ret = PTR_ERR(ps_bridge->gpio_rst_n); + dev_err(dev, "cannot get reset: %d\n", ret); + return ret; + } + + ps_bridge->bridge.funcs = &ps8640_bridge_funcs; + ps_bridge->bridge.of_node = dev->of_node; + ret = drm_bridge_add(&ps_bridge->bridge); + if (ret) { + dev_err(dev, "Failed to add bridge: %d\n", ret); + return ret; + } + + ps_bridge->page[0] = client; + ps_bridge->ddc_i2c = i2c_new_dummy(client->adapter, EDID_I2C_ADDR); + if (!ps_bridge->ddc_i2c) { + dev_err(dev, "failed ddc_i2c dummy device, address%02x\n", + EDID_I2C_ADDR); + ret = -EBUSY; + goto exit_ddc_i2c_dummy; + } + /* + * ps8640 uses multiple addresses, use dummy devices for them + * page[0]: for DP control + * page[1]: for VIDEO Bridge + * page[2]: for control top + * page[3]: for DSI Link Control1 + * page[4]: for MIPI Phy + * page[5]: for VPLL + * page[6]: for DSI Link Control2 + * page[7]: for spi rom mapping + */ + for (i = 1; i < 8; i++) { + ps_bridge->page[i] = i2c_new_dummy(client->adapter, + client->addr + i); + if (!ps_bridge->page[i]) { + dev_err(dev, "failed i2c dummy device, address%02x\n", + client->addr + i); + ret = -EBUSY; + goto exit_dummy; + } + } + i2c_set_clientdata(client, ps_bridge); + + ret = sysfs_create_group(&client->dev.kobj, &ps8640_attr_group); + if (ret) { + dev_err(dev, "failed to create sysfs entries: %d\n", ret); + goto exit_dummy; + } + + ret = devm_add_action(dev, ps8640_remove_sysfs_group, ps_bridge); + if (ret) { + dev_err(dev, "failed to add sysfs cleanup action: %d\n", ret); + goto exit_remove_sysfs; + } + return 0; + +exit_remove_sysfs: + sysfs_remove_group(&ps_bridge->page[0]->dev.kobj, &ps8640_attr_group); +exit_dummy: + for (i = 1; i < 8; i++) + if (ps_bridge->page[i]) + i2c_unregister_device(ps_bridge->page[i]); + i2c_unregister_device(ps_bridge->ddc_i2c); +exit_ddc_i2c_dummy: + drm_bridge_remove(&ps_bridge->bridge); + return ret; +} + +static int ps8640_remove(struct i2c_client *client) +{ + struct ps8640 *ps_bridge = i2c_get_clientdata(client); + int i; + + for (i = 1; i < 8; i++) + i2c_unregister_device(ps_bridge->page[i]); + + i2c_unregister_device(ps_bridge->ddc_i2c); + drm_bridge_remove(&ps_bridge->bridge); + + return 0; +} + +static const struct i2c_device_id ps8640_i2c_table[] = { + {"parade,ps8640", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, ps8640_i2c_table); + +static const struct of_device_id ps8640_match[] = { + { .compatible = "parade,ps8640" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ps8640_match); + +static struct i2c_driver ps8640_driver = { + .id_table = ps8640_i2c_table, + .probe = ps8640_probe, + .remove = ps8640_remove, + .driver = { + .name = "parade,ps8640", + .of_match_table = ps8640_match, + }, +}; +module_i2c_driver(ps8640_driver); + +MODULE_AUTHOR("Jitao Shi <jitao.shi at mediatek.com>"); +MODULE_AUTHOR("CK Hu <ck.hu at mediatek.com>"); +MODULE_DESCRIPTION("PARADE ps8640 DSI-eDP converter driver"); +MODULE_LICENSE("GPL v2"); -- 1.7.9.5
