å¨ 2016å¹´02æ15æ¥ 19:10, Yakir Yang åé:
> RK3288 need some special registers setting, we can separate
> them out by the dev_type of plat_data.
>
> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
Tested-by: Caesar Wang <wxt at rock-chips.com>
> ---
> Changes in v14: None
> Changes in v13: None
> Changes in v12: None
> Changes in v11: None
> Changes in v10: None
> Changes in v9: None
> Changes in v8: None
> Changes in v7: None
> Changes in v6: None
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
> Changes in v2:
> - Fix compile failed dut to phy_pd_addr variable misspell error
>
> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 76
> ++++++++++++++---------
> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 12 ++++
> 2 files changed, 60 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> index 3858df5..1e24b37 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> @@ -15,6 +15,8 @@
> #include <linux/delay.h>
> #include <linux/gpio.h>
>
> +#include <drm/bridge/analogix_dp.h>
> +
> #include "analogix_dp_core.h"
> #include "analogix_dp_reg.h"
>
> @@ -72,6 +74,14 @@ void analogix_dp_init_analog_param(struct
> analogix_dp_device *dp)
> reg = SEL_24M | TX_DVDD_BIT_1_0625V;
> writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_2);
>
> + if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP)) {
> + writel(REF_CLK_24M, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
> + writel(0x95, dp->reg_base + ANALOGIX_DP_PLL_REG_2);
> + writel(0x40, dp->reg_base + ANALOGIX_DP_PLL_REG_3);
> + writel(0x58, dp->reg_base + ANALOGIX_DP_PLL_REG_4);
> + writel(0x22, dp->reg_base + ANALOGIX_DP_PLL_REG_5);
> + }
> +
In general, I will say what's mean for the number.
Okay that's the rk3288 special registers setting.
> reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO;
> writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_3);
>
> @@ -206,81 +216,85 @@ void analogix_dp_set_analog_power_down(struct
> analogix_dp_device *dp,
> bool enable)
> {
> u32 reg;
> + u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
> +
> + if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
> + phy_pd_addr = ANALOGIX_DP_PD;
>
> switch (block) {
> case AUX_BLOCK:
> if (enable) {
> - reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
> + reg = readl(dp->reg_base + phy_pd_addr);
> reg |= AUX_PD;
> - writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
> + writel(reg, dp->reg_base + phy_pd_addr);
> } else {
> - reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
> + reg = readl(dp->reg_base + phy_pd_addr);
> reg &= ~AUX_PD;
> - writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
> + writel(reg, dp->reg_base + phy_pd_addr);
> }
> break;
> case CH0_BLOCK:
> if (enable) {
> - reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
> + reg = readl(dp->reg_base + phy_pd_addr);
> reg |= CH0_PD;
> - writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
> + writel(reg, dp->reg_base + phy_pd_addr);
> } else {
> - reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
> + reg = readl(dp->reg_base + phy_pd_addr);
> reg &= ~CH0_PD;
> - writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
> + writel(reg, dp->reg_base + phy_pd_addr);
> }
> break;
> case CH1_BLOCK:
> if (enable) {
> - reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
> + reg = readl(dp->reg_base + phy_pd_addr);
> reg |= CH1_PD;
> - writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
> + writel(reg, dp->reg_base + phy_pd_addr);
> } else {
> - reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
> + reg = readl(dp->reg_base + phy_pd_addr);
> reg &= ~CH1_PD;
> - writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
> + writel(reg, dp->reg_base + phy_pd_addr);
> }
> break;
> case CH2_BLOCK:
> if (enable) {
> - reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
> + reg = readl(dp->reg_base + phy_pd_addr);
> reg |= CH2_PD;
> - writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
> + writel(reg, dp->reg_base + phy_pd_addr);
> } else {
> - reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
> + reg = readl(dp->reg_base + phy_pd_addr);
> reg &= ~CH2_PD;
> - writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
> + writel(reg, dp->reg_base + phy_pd_addr);
> }
> break;
> case CH3_BLOCK:
> if (enable) {
> - reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
> + reg = readl(dp->reg_base + phy_pd_addr);
> reg |= CH3_PD;
> - writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
> + writel(reg, dp->reg_base + phy_pd_addr);
> } else {
> - reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
> + reg = readl(dp->reg_base + phy_pd_addr);
> reg &= ~CH3_PD;
> - writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
> + writel(reg, dp->reg_base + phy_pd_addr);
> }
> break;
> case ANALOG_TOTAL:
> if (enable) {
> - reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
> + reg = readl(dp->reg_base + phy_pd_addr);
> reg |= DP_PHY_PD;
> - writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
> + writel(reg, dp->reg_base + phy_pd_addr);
> } else {
> - reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
> + reg = readl(dp->reg_base + phy_pd_addr);
> reg &= ~DP_PHY_PD;
> - writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
> + writel(reg, dp->reg_base + phy_pd_addr);
> }
> break;
> case POWER_ALL:
> if (enable) {
> reg = DP_PHY_PD | AUX_PD | CH3_PD | CH2_PD |
> CH1_PD | CH0_PD;
> - writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
> + writel(reg, dp->reg_base + phy_pd_addr);
> } else {
> - writel(0x00, dp->reg_base + ANALOGIX_DP_PHY_PD);
> + writel(0x00, dp->reg_base + phy_pd_addr);
> }
> break;
> default:
> @@ -399,8 +413,14 @@ void analogix_dp_init_aux(struct analogix_dp_device *dp)
> analogix_dp_reset_aux(dp);
>
> /* Disable AUX transaction H/W retry */
> - reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(0) |
> - AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
> + if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
> + reg = AUX_BIT_PERIOD_EXPECTED_DELAY(0) |
> + AUX_HW_RETRY_COUNT_SEL(3) |
> + AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
> + else
> + reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) |
> + AUX_HW_RETRY_COUNT_SEL(0) |
> + AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
> writel(reg, dp->reg_base + ANALOGIX_DP_AUX_HW_RETRY_CTL);
>
> /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> index 738db4c..337912b 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> @@ -22,6 +22,14 @@
> #define ANALOGIX_DP_VIDEO_CTL_8 0x3C
> #define ANALOGIX_DP_VIDEO_CTL_10 0x44
>
> +#define ANALOGIX_DP_PLL_REG_1 0xfc
> +#define ANALOGIX_DP_PLL_REG_2 0x9e4
> +#define ANALOGIX_DP_PLL_REG_3 0x9e8
> +#define ANALOGIX_DP_PLL_REG_4 0x9ec
> +#define ANALOGIX_DP_PLL_REG_5 0xa00
> +
> +#define ANALOGIX_DP_PD 0x12c
> +
> #define ANALOGIX_DP_LANE_MAP 0x35C
>
> #define ANALOGIX_DP_ANALOG_CTL_1 0x370
> @@ -154,6 +162,10 @@
> #define VSYNC_POLARITY_CFG (0x1 << 1)
> #define HSYNC_POLARITY_CFG (0x1 << 0)
>
> +/* ANALOGIX_DP_PLL_REG_1 */
> +#define REF_CLK_24M (0x1 << 1)
> +#define REF_CLK_27M (0x0 << 1)
> +
> /* ANALOGIX_DP_LANE_MAP */
> #define LANE3_MAP_LOGIC_LANE_0 (0x0 << 6)
> #define LANE3_MAP_LOGIC_LANE_1 (0x1 << 6)
--
Thanks,
Caesar
