The PCI core calls pm_runtime_forbid() on device probe in pci_pm_init(),
making this the default state when radeon is loaded.
radeon_driver_load_kms() therefore calls pm_runtime_allow(), but there's
no pm_runtime_forbid() in radeon_driver_unload_kms() to balance it. Add
it so that we leave the device in the same state that we found it.
This isn't a bug, it's just good housekeeping. When radeon is first
loaded with runpm=1, then unloaded and loaded again with runpm=0,
pm_runtime_forbid() will be called from radeon_pmops_runtime_idle() or
radeon_pmops_runtime_suspend(), so the behaviour is correct. If there
ever is a third party driver for AMD cards, this commit avoids that it
has to clean up behind radeon.
Signed-off-by: Lukas Wunner <lukas at wunner.de>
---
drivers/gpu/drm/radeon/radeon_kms.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c
b/drivers/gpu/drm/radeon/radeon_kms.c
index 51998a4..835563c 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -65,6 +65,7 @@ int radeon_driver_unload_kms(struct drm_device *dev)
if (radeon_is_px(dev)) {
pm_runtime_get_sync(dev->dev);
+ pm_runtime_forbid(dev->dev);
}
radeon_kfd_device_fini(rdev);
--
2.8.1
