2016년 09월 28일 09:03에 Tobias Jakobi 이(가) 쓴 글:
> Hey Inki,
> 
> 
> Inki Dae wrote:
>>
>>
>> 2016년 09월 28일 01:52에 Tobias Jakobi 이(가) 쓴 글:
>>> Hello Andrzej,
>>>
>>>
>>> Andrzej Hajda wrote:
>>>> On 27.09.2016 13:22, Tobias Jakobi wrote:
>>>>> Hello Inki,
>>>>>
>>>>>
>>>>> Inki Dae wrote:
>>>>>> 2016년 09월 26일 20:36에 Tobias Jakobi 이(가) 쓴 글:
>>>>>>> Only manipulate the MXR_CFG and MXR_LAYER_CFG registers once
>>>>>>> in mixer_cfg_layer().
>>>>>>> Trigger this via atomic flush.
>>>>>>>
>>>>>>> Changes in v2:
>>>>>>> - issue mixer_cfg_layer() in mixer_disable()
>>>>>>> - rename fields as suggested by Andrzej
>>>>>>> - added docu to mixer context struct
>>>>>>> - simplify mixer_win_reset() as well
>>>>>>>
>>>>>>> Changes in v3:
>>>>>>> - simplify some conditions as suggested by Inki
>>>>>>> - add docu to mixer_cfg_layer()
>>>>>>> - fold switch statements into a single one
>>>>>>>
>>>>>>> Signed-off-by: Tobias Jakobi <tjakobi at math.uni-bielefeld.de>
>>>>>>> ---
>>>>>>>  drivers/gpu/drm/exynos/exynos_mixer.c | 135 
>>>>>>> ++++++++++++++++++++++------------
>>>>>>>  drivers/gpu/drm/exynos/regs-mixer.h   |   2 +
>>>>>>>  2 files changed, 92 insertions(+), 45 deletions(-)
>>>>>>>
>>>>>>> diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c 
>>>>>>> b/drivers/gpu/drm/exynos/exynos_mixer.c
>>>>>>> index 1e78d57..4f06f4d 100644
>>>>>>> --- a/drivers/gpu/drm/exynos/exynos_mixer.c
>>>>>>> +++ b/drivers/gpu/drm/exynos/exynos_mixer.c
>>>>>>> @@ -93,12 +93,25 @@ static const uint32_t vp_formats[] = {
>>>>>>>         DRM_FORMAT_NV21,
>>>>>>>  };
>>>>>>>  
>>>>>>> +/*
>>>>>>> + * Mixer context structure.
>>>>>>> + *
>>>>>>> + * @crtc: The HDMI CRTC attached to the mixer.
>>>>>>> + * @planes: Array of plane objects for each of the mixer windows.
>>>>>>> + * @active_windows: Cache of the mixer's hardware state.
>>>>>>> + *       Tracks which mixer windows are active/inactive.
>>>>>>> + * @pipe: The CRTC index.
>>>>>>> + * @flags: Bitfield build from the mixer_flag_bits enumerator.
>>>>>>> + * @mixer_resources: A struct containing registers, clocks, etc.
>>>>>>> + * @mxr_ver: The hardware revision/version of the mixer.
>>>>>>> + */
>>>>>>>  struct mixer_context {
>>>>>>>         struct platform_device *pdev;
>>>>>>>         struct device           *dev;
>>>>>>>         struct drm_device       *drm_dev;
>>>>>>>         struct exynos_drm_crtc  *crtc;
>>>>>>>         struct exynos_drm_plane planes[MIXER_WIN_NR];
>>>>>>> +       unsigned long           active_windows;
>>>>>>>         int                     pipe;
>>>>>>>         unsigned long           flags;
>>>>>>>  
>>>>>>> @@ -418,37 +431,70 @@ static void mixer_cfg_rgb_fmt(struct 
>>>>>>> mixer_context *ctx, unsigned int height)
>>>>>>>         mixer_reg_writemask(res, MXR_CFG, val, MXR_CFG_RGB_FMT_MASK);
>>>>>>>  }
>>>>>>>  
>>>>>>> -static void mixer_cfg_layer(struct mixer_context *ctx, unsigned int 
>>>>>>> win,
>>>>>>> -                           unsigned int priority, bool enable)
>>>>>>> +/**
>>>>>>> + * mixer_cfg_layer - apply layer configuration to hardware
>>>>>>> + * @ctx: mixer context
>>>>>>> + *
>>>>>>> + * This configures the MXR_CFG and MXR_LAYER_CFG hardware registers
>>>>>>> + * using the 'active_windows' field of the the mixer content, and
>>>>>>> + * the pixel format of the framebuffers associated with the enabled
>>>>>>> + * windows.
>>>>>>> + *
>>>>>>> + * Has to be called under mixer lock.
>>>>>>> + */
>>>>>>> +static void mixer_cfg_layer(struct mixer_context *ctx)
>>>>>>>  {
>>>>>>>         struct mixer_resources *res = &ctx->mixer_res;
>>>>>>> -       u32 val = enable ? ~0 : 0;
>>>>>>> -
>>>>>>> -       switch (win) {
>>>>>>> -       case 0:
>>>>>>> -               mixer_reg_writemask(res, MXR_CFG, val, 
>>>>>>> MXR_CFG_GRP0_ENABLE);
>>>>>>> -               mixer_reg_writemask(res, MXR_LAYER_CFG,
>>>>>>> -                                   MXR_LAYER_CFG_GRP0_VAL(priority),
>>>>>>> -                                   MXR_LAYER_CFG_GRP0_MASK);
>>>>>>> -               break;
>>>>>>> -       case 1:
>>>>>>> -               mixer_reg_writemask(res, MXR_CFG, val, 
>>>>>>> MXR_CFG_GRP1_ENABLE);
>>>>>>> -               mixer_reg_writemask(res, MXR_LAYER_CFG,
>>>>>>> -                                   MXR_LAYER_CFG_GRP1_VAL(priority),
>>>>>>> -                                   MXR_LAYER_CFG_GRP1_MASK);
>>>>>>> +       unsigned int win;
>>>>>>>  
>>>>>>> -               break;
>>>>>>> -       case VP_DEFAULT_WIN:
>>>>>>> -               if (test_bit(MXR_BIT_VP_ENABLED, &ctx->flags)) {
>>>>>>> -                       vp_reg_writemask(res, VP_ENABLE, val, 
>>>>>>> VP_ENABLE_ON);
>>>>>>> -                       mixer_reg_writemask(res, MXR_CFG, val,
>>>>>>> -                               MXR_CFG_VP_ENABLE);
>>>>>>> -                       mixer_reg_writemask(res, MXR_LAYER_CFG,
>>>>>>> -                                           
>>>>>>> MXR_LAYER_CFG_VP_VAL(priority),
>>>>>>> -                                           MXR_LAYER_CFG_VP_MASK);
>>>>>>> +       struct exynos_drm_plane_state *state;
>>>>>>> +       struct drm_framebuffer *fb;
>>>>>>> +       unsigned int priority;
>>>>>>> +       u32 mxr_cfg = 0, mxr_layer_cfg = 0, vp_enable = 0;
>>>>>>> +       bool enable;
>>>>>>> +
>>>>>>> +       for (win = 0; win < MIXER_WIN_NR; ++win) {
>>>>>>> +               state = 
>>>>>>> to_exynos_plane_state(ctx->planes[win].base.state);
>>>>>>> +               fb = state->fb;
>>>>>>> +
>>>>>>> +               priority = state->base.normalized_zpos + 1;
>>>>>>> +               enable = test_bit(win, &ctx->active_windows);
>>>>>>> +
>>>>>>> +               if (!enable)
>>>>>>> +                       continue;
>>>>>>> +
>>>>>>> +               BUG_ON(!fb);
>>>>>>> +
>>>>>>> +               /*
>>>>>>> +                * TODO: Don't enable alpha blending for the bottom 
>>>>>>> window.
>>>>>>> +                */
>>>>>>> +               switch (win) {
>>>>>>> +               case 0:
>>>>>>> +                       mxr_cfg |=  MXR_CFG_GRP0_ENABLE;
>>>>>>> +                       mxr_layer_cfg |= 
>>>>>>> MXR_LAYER_CFG_GRP0_VAL(priority);
>>>>>>> +                       mixer_cfg_gfx_blend(ctx, win, 
>>>>>>> is_alpha_format(fb->pixel_format));
>>>>>>> +                       break;
>>>>>>> +
>>>>>>> +               case 1:
>>>>>>> +                       mxr_cfg |=  MXR_CFG_GRP1_ENABLE;
>>>>>>> +                       mxr_layer_cfg |= 
>>>>>>> MXR_LAYER_CFG_GRP1_VAL(priority);
>>>>>>> +                       mixer_cfg_gfx_blend(ctx, win, 
>>>>>>> is_alpha_format(fb->pixel_format));
>>>>>>> +                       break;
>>>>>>> +
>>>>>>> +               case VP_DEFAULT_WIN:
>>>>>>> +                       vp_enable = VP_ENABLE_ON;
>>>>>>> +                       mxr_cfg |=  MXR_CFG_VP_ENABLE;
>>>>>>> +                       mxr_layer_cfg |= MXR_LAYER_CFG_VP_VAL(priority);
>>>>>>> +                       mixer_cfg_vp_blend(ctx);
>>>>>>> +                       break;
>>>>>>>                 }
>>>>>>> -               break;
>>>>>>>         }
>>>>>>> +
>>>>>>> +       if (test_bit(MXR_BIT_VP_ENABLED, &ctx->flags))
>>>>>>> +               vp_reg_writemask(res, VP_ENABLE, vp_enable, 
>>>>>>> VP_ENABLE_ON);
>>>>>>> +
>>>>>>> +       mixer_reg_writemask(res, MXR_CFG, mxr_cfg, MXR_CFG_ENABLE_MASK);
>>>>>>> +       mixer_reg_writemask(res, MXR_LAYER_CFG, mxr_layer_cfg, 
>>>>>>> MXR_LAYER_CFG_MASK);
>>>>>>>  }
>>>>>>>  
>>>>>>>  static void mixer_run(struct mixer_context *ctx)
>>>>>>> @@ -478,7 +524,6 @@ static void vp_video_buffer(struct mixer_context 
>>>>>>> *ctx,
>>>>>>>         struct drm_display_mode *mode = 
>>>>>>> &state->base.crtc->state->adjusted_mode;
>>>>>>>         struct mixer_resources *res = &ctx->mixer_res;
>>>>>>>         struct drm_framebuffer *fb = state->fb;
>>>>>>> -       unsigned int priority = state->base.normalized_zpos + 1;
>>>>>>>         unsigned long flags;
>>>>>>>         dma_addr_t luma_addr[2], chroma_addr[2];
>>>>>>>         bool tiled_mode = false;
>>>>>>> @@ -563,8 +608,6 @@ static void vp_video_buffer(struct mixer_context 
>>>>>>> *ctx,
>>>>>>>  
>>>>>>>         mixer_cfg_scan(ctx, mode->vdisplay);
>>>>>>>         mixer_cfg_rgb_fmt(ctx, mode->vdisplay);
>>>>>>> -       mixer_cfg_layer(ctx, plane->index, priority, true);
>>>>>>> -       mixer_cfg_vp_blend(ctx);
>>>>>> You removed the function call to set MXR_CFG and MXR_LAYER_CFG registers 
>>>>>> so what if lagacy set plane ioctl is called by user user space? Where 
>>>>>> these register are updated?
>>>>> yes, you're right. I completly forgot about the legacy codepaths. Sorry
>>>>> about that!
>>>>
>>>> Are you talking about DRM_IOCTL_MODE_SETPLANE?
>>>> It does not seem to be legacy, or to be more precise it calls
>>>> .update_plane and .disable_plane
>>>> callbacks which in exynos are set as follow:
>>>>     .update_plane    = drm_atomic_helper_update_plane,
>>>>     .disable_plane    = drm_atomic_helper_disable_plane,
>>>>
>>>> So DRM_IOCTL_MODE_SETPLANE calls atomic codepath anyway.
>>> thanks a lot for the heads-up. I can confirm that drm_mode_setplane()
>>> also goes through the atomic path.
>>>
>>> The simplified callstack:
>>> - drm_mode_setplane()
>>>   - __setplane_internal()
>>>     - disable_plane() (set in plane_helper_funcs in exynos_drm_plane.c)
>>>     - update_plane() (same here)
>>
>> Sorry for previous comments not enough.
>>
>> update_plane
>>      ...
>>      - mixer_update_plane
>>              - vp_video_buffer or mixer_graph_buffer
>>
>> However, you removed mixer_cfg_layer call from above functions.
> exactly, because that is the very purpose of this patch.
> 
> 
>> So my intention was to keep the modifed mixer_cfg_layer call on 
>> vp_video_buffer and mixer_grpah_buffer functions.
> That is not my intention. I want to move register manipulation to the
> atomic flush step.
> 
> 
>> mixer_atomic_flush function is not really proper place to call 
>> mixer_cfg_layer function even mixer_win_reset.
> Why do you think so? I think it makes perfect sense to put it there. We
> flush the new configuration to the hardware registers there.
> 
> 
>> For this I mentioned already at previous my comment,
>> "atomic_flush callback will be used to make sure registers to be updated to 
>> the real hardware. So calling mixer_cfg_layer function here wouldn't be 
>> reasonable."
> You're confusing me. That is exactly what my patch is doing. It moves
> more of the actual hardware register updating to the atomic flush step.

Ok, for your understanding, you can check atomic_begin, atomic_flush and 
update_plane callback functions of exynos_drm_fimd.c.
After that I think we could continue to discuss this. I doesn't really want to 
tackle you.

> 
> 
>> Also it would be reasonable to remove mixer_cfg_layer function call from 
>> mixer_win_reset function.
> Why is that? In mixer_win_reset() we want to apply a default
> configuration to the various registers. Hence we set active_windows to
> zero and call mixer_cfg_layer().
> 
> 
> With best wishes,
> Tobias
> 
> 
> 
>>> For completeness I've also checked drm_mode_setcrtc(), the other legacy
>>> DRM call that manipulates the primary plane.
>>>
>>> It goes the following route:
>>> - drm_mode_setcrtc
>>>   - drm_mode_set_config_internal()
>>>     - set_config() (set in exynos_crtc_funcs in exynos_drm_crtc.c)
>>>
>>> Also here: .set_config = drm_atomic_helper_set_config
>>>
>>> Both DRM_IOCTL_MODE_SETPLANE and DRM_IOCTL_MODE_CRTC go the atomic
>>> route, so the patch is fine this way.
>>>
>>> @Inki: Can you still queue this up for 4.9.y?
>>>
>>>
>>> With best wishes,
>>> Tobias
>>>
>>>
>>>>
>>>> Regards
>>>> Andrzej
>>>>
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe 
>>> linux-samsung-soc" in
>>> the body of a message to majordomo at vger.kernel.org
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>
>>>
>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" 
>> in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
> 
> 
> 
> 

Reply via email to