Reports live state of PSR2 form PSR2_STATUS register.
bit field 31:28 gives the live state of PSR2.
It can be used to check if system is in deep sleep,
selective update or selective update standby.
During video play back, we can use this to check
if system is entering SU mode or not.
when system is in idle state, DEEP_SLEEP(8) must be entered.
When video playback is happening, system must be in
SLEEP(3 / selective update) or SU_STANDBY( 6 / selective update standby)
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Cc: Jim Bride <jim.bride at linux.intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju at intel.com>
Signed-off-by: Patil Deepti <deepti.patil at intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 24 ++++++++++++++++++++++++
drivers/gpu/drm/i915/i915_reg.h | 2 ++
2 files changed, 26 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
b/drivers/gpu/drm/i915/i915_debugfs.c
index 9d7b5a8..8b0e3f9 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2606,6 +2606,30 @@ static int i915_edp_psr_status(struct seq_file *m, void
*data)
seq_printf(m, "Performance_Counter: %u\n", psrperf);
}
+ if (dev_priv->psr.psr2_support) {
+ static const char * const live_status[] = {
+ "IDLE",
+ "CAPTURE",
+ "CAPTURE_Fs",
+ "SLEEP",
+ "BUFON_FW",
+ "ML_UP",
+ "SU_STANDBY",
+ "FAST_SLEEP",
+ "DEEP_SLEEP",
+ "BUF_ON",
+ "TG_ON" };
+ u8 pos = (I915_READ(EDP_PSR2_STATUS_CTL) &
+ EDP_PSR2_STATUS_STATE_MASK) >>
+ EDP_PSR2_STATUS_STATE_SHIFT;
+
+ seq_printf(m, "PSR2_STATUS_EDP: %x\n",
+ I915_READ(EDP_PSR2_STATUS_CTL));
+
+ if (pos <= EDP_PSR2_STATUS_TG_ON)
+ seq_printf(m, "PSR2 live state %s\n",
+ live_status[pos]);
+ }
mutex_unlock(&dev_priv->psr.lock);
intel_runtime_pm_put(dev_priv);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0cbe564..03a14d9 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3624,6 +3624,8 @@ enum {
#define EDP_PSR2_STATUS_CTL _MMIO(0x6f940)
#define EDP_PSR2_STATUS_STATE_MASK (0xf<<28)
+#define EDP_PSR2_STATUS_STATE_SHIFT 28
+#define EDP_PSR2_STATUS_TG_ON 0xa
/* VGA port control */
#define ADPA _MMIO(0x61100)
--
1.9.1
