The flags indicate whether data is transmitted lsb to msb or msb to lsb
on the bus.
The exact meaning is bus-type dependent. For instance, for LVDS buses
the flags indicate whether the seven data bits transmitted in a clock
pulse are sent in normal order (msb to lsb, slots 0 to 6) or reverse
order (lsb to msb, slots 6 to 0).
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
---
Changes since v2:
- Rename the flag to DRM_BUS_FLAG_DATA_LSB_TO_MSB and add a
corresponding DRM_BUS_FLAG_DATA_MSB_TO_LSB flag.
---
include/drm/drm_connector.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index a9b95246e26e..712f255577ea 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -160,6 +160,10 @@ struct drm_display_info {
#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2)
/* drive data on neg. edge */
#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3)
+/* data is transmitted msb to lsb on the bus */
+#define DRM_BUS_FLAG_DATA_MSB_TO_LSB (1<<4)
+/* data is transmitted lsb to msb on the bus */
+#define DRM_BUS_FLAG_DATA_LSB_TO_MSB (1<<5)
/**
* @bus_flags: Additional information (like pixel signal polarity) for
--
Regards,
Laurent Pinchart
