On 01/16/2017 09:30 PM, Laurent Pinchart wrote:
> Hi Yannick,
>
> Thank you for the patch.
>
> On Monday 16 Jan 2017 14:28:58 Yannick Fertre wrote:
>> Signed-off-by: Yannick Fertre <yannick.fer...@st.com>
>> ---
>> .../devicetree/bindings/display/st,ltdc.txt | 57 ++++++++++++++++++
>> 1 file changed, 57 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/display/st,ltdc.txt
>>
>> diff --git a/Documentation/devicetree/bindings/display/st,ltdc.txt
>> b/Documentation/devicetree/bindings/display/st,ltdc.txt new file mode
>> 100644
>> index 0000000..20e89da
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/st,ltdc.txt
>> @@ -0,0 +1,57 @@
>> +* STMicroelectronics STM32 lcd-tft display controller
>> +
>> +- st-display-subsystem: Master device for DRM sub-components
>> + This device must be the parent of all the sub-components and is
>> responsible
>> + of bind them.
>
> Why do you need this ? At a quick glance the ltdc node should be enough.
Hi Laurent,
To prepare next device upstream of dsi, we need a master node
"st-display-subsystem" and a sub node "st,ltdc". It's the same kind of
node than st,stih4xx.
>
>> + Required properties:
>> + - compatible: "st,display-subsystem"
>> + - ranges: to allow probing of subdevices
>> +
>> +- ltdc_host: lcd-tft display controller host
>> + must be a sub-node of st-display-subsystem
>> + Required properties:
>> + - compatible: "st,ltdc"
>> + - reg: Physical base address of the IP registers and length of memory
>> mapped region.
>> + - clocks: from common clock binding: handle hardware IP needed clocks,
>> the
>> + number of clocks may depend of the SoC type.
>> + See ../clocks/clock-bindings.txt for details.
>> + - clock-names: names of the clocks listed in clocks property in the same
>> + order.
>
> You need to define the required/optional clocks with their names here. If they
> vary depending on the SoC, the DT bindings document need to list them for each
> SoC.
>
Ok, I'll push news bindings with pack V2.
>> + - resets: resets to be used by the device
>> + See ../reset/reset.txt for details.
>> + - reset-names: names of the resets listed in resets property in the same
>> + order.
>> + Required nodes:
>> + - Video port for RGB output.
>> +
>> +Example:
>> +
>> +/ {
>> + ...
>> + soc {
>> + ...
>> + st-display-subsystem {
>> + compatible = "st,display-subsystem";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> + dma-ranges;
>> +
>> + ltdc_host: stm32-ltdc@40016800 {
>> + compatible = "st,ltdc";
>> + reg = <0x40016800 0x200>;
>> + interrupts = <88>, <89>;
>> + resets = <&rcc 314>;
>> + clocks = <&rcc 1 8>;
>> + clock-names = "clk-lcd";
>> + status = "disabled";
>> +
>> + port {
>> + ltdc_out_rgb: endpoint {
>> + };
>> + };
>> + };
>> + };
>> + ...
>> + };
>> +};
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
